Posted on June 1, 2020March 6, 2024 by Dale Phillips Antonius Stradivarius in South Dakota Antonius Stradivarius in South Dakota by Joseph R. Johnson Originally published in American Lutherie #12, 1987 and Big Red Book of American Lutherie Volume Three, 2000 When the name Antonio Stradivari (1644–1737) is mentioned, images of fine quality violins, master craftsmanship, and exorbitantly large price tags come to mind. Stradivari is known to the world primarily as an excellent violin maker. However, the members of the violin family were not the only stringed instruments that he made. Stradivari’s output also included a harp, three known guitars, and patterns for lutes, mandolins, mandolas, and violas da gamba. The Shrine to Music Museum in Vermillion, South Dakota, is home to the “Rawlins,” one of three extant guitars made by Antonio Stradivari in Cremona, Italy, between 1680 and 1700. The second is in the Ashmolean Museum at Oxford University in England. The third, much altered and in need of restoration, is privately owned in Italy. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on May 21, 2020March 6, 2024 by Dale Phillips Systems Analysis of the Violin Systems Analysis of the Violin by A.F. Standing Originally published as Guild of American Luthiers Data Sheet #173, 1981 My first introduction to the violin was my father’s playing, and I remember, young as I was, a fascination with its strange shape and even stranger sound. From that time to this I had no further contact with the instrument until I met professionally (we are computer programmers) a young lady whose many talents include that of violin making. My interest in old crafts led us into many discussions on the design, construction and adjustment of the violin. As I borrowed, and read, the articles she had collected, I became more and more astounded as from their arcane depths arose the musty odor of eye of toad and toe of newt. With my curiosity and interest aroused it seemed a good idea to consider each part of the violin, the problem it solved, and its interaction with the remainder of the instrument. In this way, once, the basic operation of the instrument was understood, all the second order effects that make all the difference in the real world could be considered as perturbations from the basic instrument. This article was written in an attempt to see if I could, with no musical knowledge or experience whatever, determine by thought alone the modus operandi of the violin. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on May 4, 2020March 6, 2024 by Dale Phillips Free Plate Tuning, Part Two: Violins Free Plate Tuning, Part Two: Violins by Alan Carruth Originally published in American Lutherie #29, 1992 and Big Red Book of American Lutherie Volume Three, 2004 See also, Free Plate Tuning, Part One: Theory by Alan Carruth Free Plate Tuning, Part Three: Guitars by Alan Carruth Before I get into plate tuning proper I’d like to digress a bit and discuss the rationale behind the process, and a couple of other things I find it useful to keep in mind while I’m working. And I can’t think of a better way to begin than by telling you about one of my more elaborate experiments. Fig. 15 gives the relevant information on my fourth and fifth violins. The idea was to check out the influence of asymmetric back graduations by building a pair of closely-matched fiddles with that as the only variable. The one-piece backs were cut from the same plank of bird’s-eye maple and the tops were cut from a red spruce 4×6 that I took out of the wall of my house when I put in a new chimney. The molds were routed using a template. Archings were checked for height at over two dozen points on each plate and were held to .2MM. Graduation, weight, and frequency data is as shown. The delta f mentioned is the frequency drop obtained when a 5G weight was stuck to the plate in an active area of the given mode. Fittings and so on were matched as closely as possible, and the two bridges were cut back to back from the same piece of maple. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on March 5, 2020March 7, 2024 by Dale Phillips Building a Plywood Bass Building a Plywood Bass by Richard Ennis Originally published in American Lutherie #3, 1985 and Big Red Book of American Lutherie Volume One, 2000 see also, In Praise of the Plywood Bass by Frederick C. Lyman, Jr. Here is the basic design of one of the more unusual instruments I build in my workshop. This plywood three-quarter double bass of approximately 90 liters is built to a design that increases durability and ease of transport with reduced cost and maintenance. It has proved to be very popular with musicians and attracts the attention of nonmusicians as well. The demand for an instrument such as this is widespread. Quality double basses are scarce and very expensive, and certainly beyond the reach of beginners, schools, part-time bands, and those musicians who might take it up as a second instrument. An instrument of this design can be easily purchased and cared for and makes an ideal community instrument. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on March 4, 2020March 7, 2024 by Dale Phillips Violin Top Removal Violin Top Removal by George Manno Originally published in American Lutherie #5, 1986 and Big Red Book of American Lutherie Volume One, 2000 One of the most difficult repairs to perform on a violin is removing its top after it has been glued with a yellow or a polyvinyl white glue, such as Titebond. These glues do exactly what the name implies: Their main objective is to close the separation between the rib and the top or back permanently. Violins are built in such a way that they can be taken apart if necessary. On many occasions, we have seen instruments come into our shop that were repaired by amateurs using whatever glue was available at the local hardware store. Apparently, thoughts of future adjustments to the neck or bass bar are not considered. Efforts to remove the top without damaging it after such glues have been used were, for a time, a cause of great distress to us. We have found a way to dissolve such a bond without harming the table, ribs, or back. Using a number of thin artist’s spatulas, a syringe, and some warm vinegar, along with a lot of patience, the removal of the top can be done successfully and the repair completed in a few days. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
