Posted on September 22, 2021May 20, 2025 by Dale Phillips Building the Tar Building the Tar by Nasser Shirazi Originally published in American Lutherie #10, 1987 and Big Red Book of American Lutherie Volume One, 2000 The Tar (meaning “string” or “chord” in Farsi) is a classical Iranian stringed instrument which has two body cavities and is played by plucking the strings. The two sound chambers are covered with two separate skin membranes. The instrument’s six strings are tuned in pairs and are played with a brass plectrum inserted in a lump of beeswax. The tar is an integral part of classical Iranian music ensembles, along with the kamanché, setar, ney, santour, tomback, and oud. The soundbox is extensively made of mulberry wood, although other woods such as maple, walnut, and apricot have also been used. Use a well-seasoned wood with no knots, checks, or other wood defects known to luthiers. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on August 11, 2021May 19, 2025 by Dale Phillips The Sami-Sen The Sami-Sen by Nicholas Von Robison Originally published in American Lutherie #12, 1987 and Big Red Book of American Lutherie Volume One, 2000 The Sami-Sen (pronounced and sometimes spelled “shamisen”) is one of the trinity of Japan’s important musical instruments, the koto and shakuhachi* being the other two. The equivalent of the Chinese san hsien, this three-stringed lute was originally a solo instrument, played by a wife for her husband, or a lone musician for his or her own enjoyment (and Buddha’s too!). Not until the Edo period (early 17th to mid-19th centuries) was the sami-sen used in <em>gagaku</em> (orchestral) and chamber ensembles. In recent years there has been a revival in the ancient solo literature, many of the solo pieces being conceived of as an aid to meditation. Poetic and descriptive song titles that reflect tone-painting are not uncommon. The drawing was done from an instrument whose equivalent is probably the Volkswagon or the Sears Silvertone. Even though this bottom-of-the-line instrument shows some crudeness (the inside arch to the soundbox sides appears to have been hacked out with an adz), it is still remarkable. The neck joints fit perfectly, and the soundbox wood is a fine-figured, mahogany-like hardwood that is very attractive. Mrs. Richard Ota, a sami-sen teacher and performer, obtained for me strings, bridge, and pegs, and she owns an instrument of similar caliber to mine, plus a really nice instrument. Lacking a fretboard, once the performer’s fingers have put a hollow in the neck from the most used fretting positions after a few years, the neck is useless. For that reason, the serious sami-sen player owns a cheap instrument for practice and a better one reserved for performing. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on June 23, 2021May 21, 2025 by Dale Phillips Drafting Instrument Plans Drafting Instrument Plans by Ted Davis from his 1984 GAL Convention lecture Originally published in American Lutherie #4, 1985 and Big Red Book of American Lutherie Volume One, 2000 I feel that for every 1% I put into the Guild, I get back about 120%. And I’m very high on the plan series. It’s an opportunity for repairmen and builders to preserve information about some instruments that would otherwise be lost. By making these plans available to more people, even if they don’t build them, they will see what they look like and what they are. Of course, you will also have the opportunity to build replicas of these fine old instruments. Many of them have historical value, and many of them have monetary value. I’m sure there are a lot of “neophyte” luthiers in the audience today that would like to contribute to the Guild’s publications but just don’t feel they have the experience. Well, here’s something you can do. I’m sure you know someone that has a fine old instrument that’s a collector’s item, or perhaps you have one yourself, or perhaps the repairman will have one come into his shop. Take a few hours, take the dimensions of it, sketch it, and you can draw it at your leisure. Drawing an instrument plan is not all that difficult, but it is time consuming. You’ll spend ten, twelve, maybe fifteen hours or more on your first one. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on June 22, 2020May 22, 2025 by Dale Phillips Brazilian Guitar Makers Brazilian Guitarmakers by Roberto Gomes Originally published in American Lutherie #33, 1993 and Big Red Book of American Lutherie Volume Three, 2004 The guitar has been the main musical instrument in Brazil since it was brought by the Portuguese colonizers centuries ago. In those times, Baroque guitars were the most common string instruments. They had five courses of gut or wire strings. Since then it hasn’t changed much, as we can see in the “Brazilian viola” which is used for a kind of Brazilian country music called musica sertaneja (countryside music). The shape of the soundbox of this viola today resembles more a small classic guitar. Unfortunately there are very few records of those times, making it difficult to make a better study of those guitars and their makers. It’s known that most of the instruments were made in Portugal, Italy, and France. The first decade of this century brought three immigrant families from Italy: the Gianninis, the DiGiorgios, and the DelVecchios. These families were luthiers in their country of origin and later they founded the main Brazilian guitar factories which became the backbone of Brazilian-made guitars for nearly eighty years. They made mostly classic guitars and some violins, along with Brazilian violas. They also made mandolins, first with vaulted backs like lutes and later with flat backs, which are used to play choro music. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on June 28, 2019May 14, 2025 by Dale Phillips The Trio Romantico and the Requinto The Trio Romántico and the Requinto by C.F. Casey previously published in American Lutherie #89, 2007 Picture it: You’re sitting in an open-air courtyard, perhaps in Guadalajara, perhaps in San Juan, perhaps in Buenos Aires. Your surroundings are lit only by the candles on the tables and the stars above. The air is like a caress on your skin. Across from you sits someone you care about very much. Nearby, in the semi-darkness, a small group wanders from table to table. You hear voices in close harmony, singing in Spanish, singing of love. Two guitars throb in the rhythm of a bolero or a tango. And above, between, and around the words, a third guitar pours out cascades and arabesques of clear, shimmering notes. As the song ends and the group moves on, you gaze through the candle light, deep into the eyes of your companion, and say: “I’d love to get a closer look at that lead guitar; it’s got a really unique sound. Maybe I could get my inspection mirror inside it and get a look at the bracing.” We can’t help it: we’re luthiers. You were listening to the sound of a trio romántico, and the lead instrument was a requinto, a smaller version of the regular nylon-string guitar, tuned a perfect fourth higher (ADGCEA). Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also recieve 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
