Posted on

Questions: Simple Instrument Plan

Questions: Simple Instrument Plan

by Tim Olsen

Originally published in American Lutherie #76, 2003

 

Russell Lee from cyberspace asks:

I have no lutherie experience and would like to purchase a plan for a simple instrument. (I know others who have experience and tools who can help.) Which of the bowed instruments for which you sell plans is the easiest to make? Or is some other plan (other than a bowed instrument) much easier?


Tim Olsen, our fearless leader,
responds:

There is only one GAL plan that I would think of as easy to make. Many are simple instruments, but the plans may not include full instructions, or the subtleties of those instruments may not be apparent. So I'd draw your attention to GAL Plan #44, “True Companion” Travel Guitar by John Calkin. Fairly detailed how-to text is included along with several photos of the building process. No side bending is required. An article and reduced plan appear in AL#57. The plan can be ordered directly from our website at www.luth.org and an image of it can be seen at https://luth.org/instrument-plans/guitar-plans/steel-string-guitar-plans/#Plan44. ◆

Posted on

Letter: Facts Regarding Juan Serrano

Letter: Facts Regarding Juan Serrano

by David Macias

Originally published in American Lutherie #86, 2006

 

Hi Tim,

I enjoyed the R.E. Bruné piece on Manuel Reyes, and Cordoba in general in American Luthierie #84. My reason for writing is that there is a bit of misinformation on Juan Serrano. Maestro Juan Serrano’s father, Antonio Serrano, was known as Antonio Del Lunar. El Habichuela was and is someone else. Also the falseta recording played on the town clock is a Solea, and not a Siguiriyas, as stated. I asked Juan a few days ago, just to have my facts straight. He assured me that I was right. Maestro Serrano and I have been close friends for some twenty-six years. He has told me many stories about his life, his family, and his career. I am also very proud to say that Maestro Serrano was my flamenco guitar teacher for many years, and prouder yet that he has been playing his concerts on guitars that I constructed for him.


R.E. Bruné responds:

I appreciate David Macias’ additional corrections and information in response to my article. The quote about El Habichuela being Juan Serrano’s father and the teacher of Manuel Reyes came directly from the interview of Manuel Reyes in Flamenco International Magazine (July–September 1998, p. 19), and at the time I read it, it didn’t ring true to me either, as I know the large Habichuela Gypsy clan to be from the Sacromonte of Granada, not Cordoba. However, as there have been several unrelated artists over the centuries using the “Habichuela” name, I figured the anonymous interviewer’s direct quote would trump my own vague memory. Wrong! Mr. Macias is quite correct. I remember first meeting Juan Serrano around 1966, and he did mention his father was known as Antonio del Lunar (Antonio, he of the mole). I should have remembered this, as he is not to be confused with Perico el del Lunar who played for many years at La Zambra in Madrid and was the accompanist on the first anthology of Cante Flamenco issued by Westminster records in 1955.

Likewise, my memory of the Cordoba clock tower music dates to my first visit to Spain in 1967, nearly forty years ago, and obviously is not as precise as I would prefer. This is the reason why for many decades now I have been photographing and making notes of all the great instruments that pass through my hands, as I knew it was only a matter of time when my sharp memory and dull tools would begin to change place.

Thanks also and best wishes to Maestro Serrano, who is without doubt one of the great flamenco figuras of the 20th century.

Posted on

Questions: Acoustic Guitar Wood

Questions: Acoustic Guitar Wood

by John Calkin

Originally published in American Lutherie #93, 2009



Eric Gran from Norway asks:

In the back of my brain, the idea of building guitar(s) is slowly growing. I would like to use as much local wood in my projects as possible. I found John Calkin’s article “The Heretic’s Guide to Alternative Lutherie Woods” enlightening. I can find local spruce, birch, fir, larch, maple, alder, rowan tree (European mountain ash) just to mention those I believe are most suited. Do you believe that a good acoustic guitar could be made only of wood found in Snåsa (the community where I live) in Norway? I understand that the fretboard and bridge need to be made of especially hard wood, so that may be a problem, but could you give me any idea of what properties are demanded?


John Calkin from Greenville, VA responds:

I encourage your use of native wood species. Processing your own wood is a huge amount of work, but it is also hugely gratifying. Starting with a standing tree will amplify both ends of that statement. But I also encourage you to begin a guitar as soon as possible. You could build several instruments in the time it takes large planks of wood to season. Hardwood from a local source will serve you well. Try to find quartersawn wood if possible, but proceed with your project even if you can’t. Quartered side wood is less likely to distort during bending, though any piece of wood can surprise you. I’ve used birch, maple, cherry, and oak to build beautiful, wonderful instruments, but you’ll have to maintain your resolve against the conservative members of our fraternity who will argue (loudly!) that only traditional wood varieties are worthy of your time. I’d recommend commercially prepared top wood for your first instruments, even though local spruce is available to you, just to put to rest any doubts you may have about the worthiness of your materials.

Become A Member to Continue Reading This Article

This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page.

If you are already a member, login for access or contact us to setup your account.
Posted on

Letter: Replying to Binding Cutter Review

Letter: Replying to Binding Cutter Review

by Harry Fleishman

Originally published in American Lutherie #90, 2007



Dear Tim, et al.,

I must compliment you on the beautiful cover photos (AL#89). I couldn’t love it more if they were pictures of my own instrument. Seriously, thanks to Jon Peterson for making me look good.

Things got even better once I stopped admiring my own work and opened the issue... but not until I got through the very sad news of more luthiers we have lost. It’s simply hard to believe that these vital, generous people are gone, whom we saw and heard, learned from, played with, and shared with so recently.

Become A Member to Continue Reading This Article

This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page.

If you are already a member, login for access or contact us to setup your account.
Posted on

Questions: B-String Compensation

Questions: B-String Compensation

by John Calkin

Originally published in American Lutherie #100, 2009

 

Tom from Ohio asks:

I built a parlor guitar for a buddy of mine and it really turned out nice... except. The B string is really sharp. This is a 12-fret guitar with a 24.9" scale length. I added 2.5MM compensation and the action is very low. I further compensated the B string as far as it would go by lengthening its point on the saddle. I’ve really never had this problem before. Is it because of the 12-fret configuration? What’s the fix?


John Calkin from Greenville, Virginia
replies:

Cut a bit of saddle material (bone, or whatever you used) and glue it to the back of the current saddle, but only behind the B string. Let the new piece rest right on the bridge so the saddle won’t be torqued, but don’t glue it to the bridge. Level the new piece with the real saddle, then use a piece of .010" wire under the B string to find the intonation point. Mark the intonation point with a really sharp pencil, then take the saddle out of the bridge, file the bone to the correct intonation point, and use needle files to blend the new bone into the old to make it pretty. This sounds kind of strange but it works fine. In fact, I’ve used this trick to correct intonation on a whole saddle, rather than to fill the slot and recut it to a more accurate position. It’s sort of an emergency measure, but in your case it should be perfectly acceptable if you make it pretty enough. ◆