Posted on July 7, 2024May 21, 2025 by Dale Phillips Letter: Gourd Seeds Letter: Gourd Seeds by Tony Pizzo Originally published in American Lutherie #2, 1985 Yo Tim, Deb and Bonnie! American Lutherie looks great! You join a select group of survivors with this latest move. I’m going to (against my better judgement) try growing some gourds under plastic up here, but I don’t expect much, so no data sheet. But I’ve got a list of gourds and gourd seed for sale from The Gourd (February issue) magazine which may be of use to beleaguered luthiers. It may be easiest for people looking for gourds to contact Charlie Cannon as he’s already set up to sell them. Of course people who can get to the Ohio Fair can pick up gourds at the Gourd Show there — shipping can be a headache for growers. This is the best I’ve been able to come up with in this department. Very hard to get them on the east coast. (American Gourd Society, Box 274, Mt. Gilead, OH 43338 and Charlie Cannon, Rt. 1, Box 49, Hobgood, NC 27843) Become A Member to Continue Reading This Article This article is part of the Articles Online featured on our website for Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 3 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. MEMBERS: login for access or contact us to setup your account.
Posted on July 7, 2024May 19, 2025 by Dale Phillips Monochord Enthusiasts “Dig” Colo. Monochord Enthusiasts “Dig” Colo. “14,000 Feet and Beyond” Proclaims Participant by Bonnie Carol Originally published in Guild of American Luthiers Newsletter Vol. 4, #4, 1976 Note: The following is a report on the “In Search of the Wild Dulcimer, Kindred Gathering II”, held August 13, 14, 15, 1976. We dulcimer players got together at a 130 acre homestead in the Colorado Rockies near Fort Collins. It all began with the arrival of Janette Gould, Robert Force, Albert d’Ossche, Ian, Neal, Sally and Shilo Hellman, a week or so in advance. We all fixed trucks, dug outhouses, hiked into snowstorms at 14,000 feet and beyond, ate meals prepared by professional cooks, Neal and Sally, and even played dulcimer on occasion. The festival included workshops of “Rhythm” (Albert d’Ossche), “Fingerpicking” (Bonnie Carol and Roger Harris), “Mode within Modes” (Neal Hellman), “Moving with Voice” (opera as learned in Southwestern New Mexico from an Italian opera singer by Robert and Janette), “Blues Dulcimer” (by some California folks with chromatic dulcimers with guitar-like necks, Robert and Susan Cole and Mark and Julie Warner), “Building” (Roger Harris and Bonnie Carol), and probably others that I didn’t hear about. Many impromptu jams and occurrences — including a banjo (played by Blind Boy d’Ossche), fiddle, kazzo, and even dulcimer reveille on Sunday; square dancing with a live Colorado caller, Connie Baker; and a Saturday night fireside song swap. What more could we want? ◆
Posted on July 7, 2024October 2, 2024 by Dale Phillips Novice Notes Novice Notes by Donald Curry Originally published in Guild of American Luthiers Newsletter Vol. 4, #4, 1976 Tools are a prerequisite to any art or craft and so it is important for the beginner to have a thorough knowledge of tools and their proper applications before purchasing the first one. The quality and types of tools available to the luthier will have a direct effect on not only the finished product but also on the ease with which the work progresses. It is for these reasons that the amateur or novice luthier should have thorough knowledge of the tools utilized by the craft before beginning the work. It is also a good idea to know exactly what type instruments (violin, guitar, etc.) you wish to construct before you purchase tools. This will enable you to buy only those you specifically need avoiding the purchase of non-essential and duplicative tools. Tools of the luthier may be divided into three broad categories: (1) General woodworking tools; those tools used by all types of woodworkers such as carvers, cabinet makers, joiners, etc. (2) Special tools manufactured specifically for building or repairing one type or another musical instrument. (3) Special tools the luthier must either modify or adapt from an existing tool or fabricate from scratch. Become A Member to Continue Reading This Article This article is part of the Articles Online featured on our website for Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 3 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. MEMBERS: login for access or contact us to setup your account.
Posted on July 7, 2024October 2, 2024 by Dale Phillips Novice Notes Novice Notes by Donald Curry Originally published in Guild of American Luthiers Newsletter Vol. 4, #3, 1976 After having read my first two issues of the “Quarterly” and the G.A.L. Internal Affairs bulletin no. 2, I feel there is a need for more positive material and less criticism of everything and everybody. It is to this end that I hope this letter will serve. First I wish to address the problem of materials. In Vol. 4, No. 2 on page 19, Rick Boling has a poem which suggests a tree planting project. I am in full favor of such a proposal and I think all luthiers whether they be amateur or professional, beginner or master should support such a project. Without doubt a luthier depends on wood of high quality unless you are willing to accept a future populated by instruments with fiberglass bodies, aluminum necks, and made on assembly lines. Remember, trees are a renewable resource. To meet the more immediate needs of some luthiers, I would like to see a materials exchange program sponsored by the Guild. It would seem that there must be numerous professionals who have, over the years, obtained woods which for one reason or another they feel are not up to par for use in the very fine expensive instruments they make and so discard these pieces when these same woods might be perfectly satisfactory for the beginner who is still experimenting and does not want to invest in fine expensive wood. Those who have such discards, rather than letting it go to waste, could offer it for sale at reasonable prices through the Guild whereby they would be helping the beginner at no loss to themselves. Become A Member to Continue Reading This Article This article is part of the Articles Online featured on our website for Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 3 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. MEMBERS: login for access or contact us to setup your account.
Posted on July 7, 2024May 14, 2025 by Dale Phillips Operation: Bootstraps Britain Operation: Bootstraps Britain by Theron McClure Originally published in Guild of American Luthiers Newsletter Vol. 4, #2, 1976 The English luthiers are two years behind in filling their orders from customers. You cannot buy lutes, viols, etc., “off the hook” in London. A choice of harpsichords is limited. It is not the musical and playing public who caused this short supply of instruments in Britain. It was the luthiers themselves who created and developed the healthy market for instruments. But how? By playing. Makers of those early-type instruments which are so much easier to learn to play then are the symphonic type, built lutes and viols for themselves taught themselves to play them, and presented concerts which developed audiences and buyers for these musical products. American luthiers can do the same thing and have the same successes. How will a prospective buyer of an instrument know whether he wants you instrument if he doesn’t hear it demonstrated for him, and he himself can’t play? Become A Member to Continue Reading This Article This article is part of the Articles Online featured on our website for Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 3 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. MEMBERS: login for access or contact us to setup your account.
