Chalk-fitting Guitar Braces

by Stephen Marchione

from his 2017 GAL Convention workshop

Originally published in American Lutherie #140, 2020



First, have a plan. Know what you’re making. It seems like an obvious thing, but sometimes people start a guitar without a good idea of what the brace layout will be. When I design a new model, I’ll often get a piece of aluminum flashing and lay out a bracing template. If you’re building an historical model, you can transfer the blueprint to a template of aluminum or plexiglas. This gives you a clear idea of what your braces are supposed to be doing, and it lets you be sure that the braces end up where they were designed to go. Photo 1 is a closeup of one of my bracing templates. I use the little holes to make pencil marks on the soundboard.

On a classical guitar, a lot of builders push the big harmonic bars down into the solera, or dished workboard. But that can cause distortion of the top. Even on a Spanish guitar, I take the time to chalk-fit the brace. That gives a better structure with less stress. I highly recommend it.