Posted on August 11, 2021May 14, 2025 by Dale Phillips Fiddle Facts Fiddle Facts by Al Stancel Originally published in American Lutherie #8, 1986 and Big Red Book of American Lutherie Volume One, 2000 Steel Wool: A No-No. Steel wool is still used by some players to clean strings and momentarily increase bow hair grip. Warnings: 1) Steel wool destroys strings with repeated use; 2) Steel wool contains an oil to prevent its rusting. This oil transfers to the bow hair, the case, the blanket and everything, compounding the bow skip problem. The solution is to stop using steel wool and start with fresh hair and a cleaned case plus new strings. Spotlight on the Bow Bug. Bow bugs are in Indiana, New York, Miami, and all points! A bow used once per day will not be cut up by the bow bug; he (it) hates light, and will not park on a bow used or kept in light. The bow case closed for a few weeks is an open invitation for him to munch on the rosened hair. The bug can get in the case at any time, or never. It is not predictable. However, if you have chunks of hair cut in the case, be sure to vacuum the case thoroughly and add two plain moth balls to the closed case. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on December 27, 2020May 20, 2025 by Dale Phillips Bass String Choices Bass String Choices by Frederick C. Lyman, Jr. Originally published in American Lutherie #5, 1986 and Big Red Book of American Lutherie, Volume One, 2000 Fifty years ago, basses had gut strings, usually the top two plain gut and the lower two wound with wire. Whatever techniques a bassist wished to learn, classical, jazz, or the various folk/ethnic categories, they had to be within the limited possibilities afforded by this kind of string. Gut strings were at their best in the deep background tones of a symphonic bass section because they had a strong, true fundamental that stayed back where it belonged. Plucked, they had a punchy jazz rhythm sound in the lower and middle register, sometimes producing a delayed response that was known popularly as the “walking” effect. For solos of any sort, the range was limited because the high notes were feeble and uncentered. The first steel strings for bass, with a solid wire core, were stiff and had a harsh, metallic sound. But improved strings were developed with flexible, stranded cores and multiple windings. These were developed along the lines of two different design philosophies, and musicians had to choose between them. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on May 21, 2020May 16, 2025 by Dale Phillips The Portuguese Guitarra: A Modern Cittern The Portuguese Guitarra: A Modern Cittern by Ronald Louis Fernández Originally published in American Lutherie #27, 1991 and Big Red Book of American Lutherie Volume Three, 2004 In Portugal, the word guitarra refers to a present-day cittern similar in appearance to and directly derived from the 18th-century English guitar. This instrument, typically accompanied by a Spanish-type guitar called viola or violão in Portuguese, is used in performing musical variations and in accompanying the fado, an urban Portuguese song form. Consequently, it is also known in Portuguese as the guitarra de fado. While these instruments are not abundant in North America, luthiers do encounter them here, especially where Portuguese fishermen have come ashore or emigrants have settled — New Bedford and Fall River, Massachusetts; the Hawaiian Islands; Providence, Rhode Island; San Diego, San Jose, Tulare, Visalia, Artesia, and Chino, California; Newark, New Jersey; Seattle, Washington; Montreal, Quebec; Ottawa and Toronto, Ontario; Winnipeg, Manitoba; and Vancouver, British Columbia. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on January 6, 2020May 21, 2025 by Dale Phillips Devolution of the Modern Lute Devolution of the Modern Lute by Robert Cooper from his 1984 GAL Convention lecture Originally published in American Lutherie #4, 1985 and Big Red Book of American Lutherie, Volume One, 2000 The other way to do it is with a dovetail extension on the neck, which slides into the block. But that is not really the historical way. Here again, we’re getting back to the historical method, and it seems to be perfectly adequate. It is common in old lutes to use no tail block whatever. Also, a lute has no edge binding or lining; the top is simply glued right to the rib. The bracing of the lute top is almost entirely composed of transverse bars, with just a J-shape bar and two smaller bars behind the bridge. The transverse bars run directly across the instrument and are butted and glued directly to the sides. The grain of those transverse bars is horizontal; it runs parallel to the top. You may wonder why in the world didn’t they do it logically, like guitar builders, and run it vertically. The probable reason is that when you make a lot of lutes you have a lot of top wood left over from pieces that you broke. Vertical grain top scraps would make horizontal grain braces. Also, if you split braces out of a billet, they split better this way than otherwise. These braces are rather high. The main brace is a little over an inch tall, by maybe 5MM. They are quite substantial, so the fact that the grain runs flat does not pose a strength problem. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on November 19, 2019May 23, 2025 by Dale Phillips What You Should Know About The Hardanger Fiddle What You Should Know About The Hardanger Fiddle by David Golber Previously published in American Lutherie #36, 1993 and The Big Red Book of American Lutherie, Volume Three, 2004 Someone has walked into your shop with yet another weird instrument. This time, it’s sort of like a violin, but it has a whole lot of pegs, the top is carved funny, it has pearl and bone inlay, and it’s decorated with flowery drawings. He says his grandfather brought it from Norway in 1890, and he wants you to put it in playing condition. Well, it’s a Hardanger fiddle (hardingfele in Norwegian). The instrument originated in the area around the Hardanger fjord, whence its name. It is distinctly Norwegian; in fact, it is played in only about a quarter of Norway, the western and south-central areas. The oldest instrument found has a date of 1651. The musical tradition is still very much alive, and continues unbroken up to the present. Beginning in about 1850, there was an absolutely enormous emigration from Norway to America — something like a third of the population. Those who played fiddle of course brought their fiddles with them. In addition there were tours by professional players who performed for their emigrated countrymen and then returned to Norway. But the instrument and the music died out in America. The children of the immigrants rarely learned to play, and father’s fiddle lay in its case in the attic, or was hung on the wall like an icon of a lost era. Now there is something like a revival here in America, not only among the descendants of the immigrants, but also among those not of Norwegian ancestry who have discovered the music. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
