Posted on August 11, 2021May 16, 2025 by Dale Phillips Floyd Floyd by Nicholas von Robison Originally published in American Lutherie #37, 1994 KERplunkit! I reduced speed hoping the noise would go away, but no such luck. I had been traveling up US 395 from Los Angeles, and for the last half-hour I had not seen another vehicle, village, or even a gas station. Just dust, sage, and a few billboards. Then, RANDSBURG — 35 MPH. I dutifully slowed and glimpsing a hand-painted GARAGE sign, pulled over and shut her down in front of the big double doors. I squatted behind the left rear wheel and saw that the rubber bushing on the shock absorber had deteriorated and come off, so that the shock was metal-to-metal on the stud. Sensing a presence beside me, I turned, and was about six inches away from a pock-marked face with three days of salt-and-pepper stubble. He grinned — no teeth and purple gums. I caught a whiff of unwashed socks and potato skins. Another nanosecond and the potato smell registered as vodka. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on August 11, 2021May 16, 2025 by Dale Phillips The Anti-Murphy Concert The Anti-Murphy Concert by Alan Carruth Originally published in American Lutherie #39, 1994 I recently had the privilege of attending a somewhat unusual concert by the Tokyo String Quartet, with some acoustics experiments thrown in. Or maybe it was a physics lecture with live accompaniment? And then there was the quiz show part... I guess I’d better explain. The whole thing seems to have started with the coming together of a number of good ideas. One of the first was a plan by the Acoustical Society of America to produce an educational video on acoustics for grades K–12. This, of course, would require money to do, and the suggestion was made that a benefit concert be held. The members of the Tokyo String Quartet were contacted, and graciously consented. So far, so simple. But remember, we’re dealing with acousticians here. Why not use the opportunity to do a little research? For one thing, while the acoustics of empty halls are reasonably well understood, nobody is really sure what happens when you put in the audience. Since the object of most concert promoters is to have as large an audience as possible, and nobody likes to listen to music in an acoustically lousy hall, it seemed like a good subject for an experiment. And how about that violin thing; you know old vs. new and all? And while we’re at it... Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on August 11, 2021May 26, 2025 by Dale Phillips Wood Bibliography Wood Bibliography by Nicholas Von Robison Originally published ?, 1994 and Lutherie Woods and Steel String Guitars, 1998 The literature covering trees, wood, and wood technology goes back many years. Unfortunately, much of the information one desires on a certain wood or species is scattered about in the form of articles or abstracts in obscure scientific or trade journals. What follows is an annotated listing of the major works from which gleanings in the notes or bibliographies of these will enable one to delve into the literature more fully. Many, possibly most, of these books may suffice in answering any questions one may initially have. Many are out-of-print (OOP); many are unique and have no current replacement. They may be found in libraries, used book stores, or by having a search done by a specialist bookseller. Prices change frequently so the following categories are used for those books currently in print: inexpensive (up to $10), moderate ($10–$25), expensive ($25–$50), very expensive ($50+). This list is not exhaustive, but I believe it to be fairly comprehensive and it will aid anyone who wants or needs to learn more about woods or the trees they come from. Finding some of these books is very difficult but half the fun of it. Nomenclature Bailey, L. H. and Bailey, Ethel Zoe Hortus Second. New York, NY: Macmillan Co., 17th printing 1972. A concise dictionary of gardening, general horticulture, and cultivated plants in North America. While this 800-or-so page book covers plants other than trees, it’s a useful reference for spelling, checking families, and looking up archaic plant names. Hortus 3rd now out. Very expensive. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on August 11, 2021May 30, 2025 by Dale Phillips The Acoustical Characteristics of the Concert Cimbalom The Acoustical Characteristics of the Concert Cimbalom by Janos Pap Originally published in American Lutherie #61, 2000 We may be surprised that the sound of the concert cimbalom, or Hungarian hammered dulcimer, is occasionally similar to that of the piano. But we can be sure that it is not a piano, only related to it. The cimbalom produces a little more nasal sound, with a rougher timbre. The acoustical differences derive from the construction of the instrument and the manner of playing. I have devoted much time to making acoustical measurements on concert cimbaloms at the Acoustic Research Laboratory of the Hungarian Academy of Sciences in an anechoic chamber, and on a cimbalom model at the Institute of Musicology at Cologne University, hoping to satisfy my curiosity about the causes and effects of the cimbalom’s sound. In instruments of the hammered dulcimer family, the form is determined by the mode of playing. The player strikes the strings with two hammers. The strings must be divided to give a large range of notes, and the struck parts of the strings must be raised for playability. The string-dividing determines the damping features, and thus the timbre and the decay. The raising of the strings results in high downward force on the bridge, which determines the sound indirectly, by the mode of energy transport and radiation. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on August 11, 2021May 30, 2025 by Dale Phillips Router Jig for Shaping a Neck Router Jig for Shaping a Neck by Mike Nealon Originally published in American Lutherie #62, 2000 This jig is designed to carve a guitar neck with a constant thickness of 5/8" from the nut to about the 10th fret. The shaft of the neck has a circular cross section and is cut so smoothly that only a minimal amount of finish sanding is required. To carve a neck to this shape profile while also tapering the neck width requires that the neck billet be placed at an angle to the axis of rotation, shown schematically in Fig. 1. These particular necks, which I make for thin-body (2 1/4˝) acoustic guitars, are cut to the specifications found on the Martin dreadnought blueprint (except for the taper and the length of the heel). Since the heel is only 2" tall, the router can pass over the top of the heel. The necks are 14.05" long from the nut to the body; the region of constant thickness is 11 1/4" long, leaving 2 3/4" for the curve of the heel. The jig is made in two parts separately mounted to a base plate: an inclined router table, and a rotation stage. The router table shown in Photo 1 is a wooden box on top of which will be a template to guide the router along a straight line. The rotation stage consists of a long narrow wooden platform, Photo 2, into which will be embedded a steel rod. The rod acts as the axis of rotation and is parallel to the base plate. The top of the rotation stage is tapered at the same angle as the router table. The neck billet is clamped, fretboard surface down, to this platform. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
