Posted on April 29, 2021May 21, 2025 by Dale Phillips Rosin Varnishes Rosin Varnishes by Louis DeGrazia Originally published in Guild of American Luthiers Data Sheet #226, 1982 and Big Red Book of American Lutherie Volume One, 2000 Rosin varnishes are shunned by master violin makers because they are soft, “chippy,” and do not adhere well. Yet they are not so bad in these respects that they could not be used by an amateur or beginner on instruments with no pretension to outlast their maker. Pale rosin is a wonderful, natural, wood-derived resin that can be very easily made into a variety of beautiful and acoustically suitable varnishes both of the spirit and oil type. Its solubility in both alcohol and turpentine and its compatibility with oils and other resins make it a versatile ingredient that can help in combining normally incompatible substances to achieve special properties. Rosin varnishes have been around for centuries and in some respects they resemble those of the old Cremonese masters. Pale rosin in powdered form can be obtained from pharmaceutical companies which use it in preparation of salves and ointments. This is the purest grade and is recommended for varnish making. Rosin can be added to many varnishes to add body and to make them softer. Adding rosin to shellac makes a “woodcarver’s varnish” that can be prepared in just a few minutes, although it is best to let it stand overnight. This varnish brushes well, dries considerably slower than straight shellac, has good luster, and is much softer than shellac. To prepare, simply dissolve as much rosin as will go into solution in orange shellac and strain. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on April 13, 2021May 14, 2025 by Dale Phillips Bow Hair Jig Bow Hair Jig by Thomas Snyder Originally published in American Lutherie #3, 1985 and Big Red Book of American Lutherie Volume One, 2000 As and apprentice luthier, I have come up with a better mousetrap for rehairing bows. The results with this method have been uniform hair tension, long-term retention, and reduction in rehairing time. The jig was fabricated from pine and oak. I used oak on all blocks. Item 4 makes a great carving back for ferrule wedges. I average ten bows a month and this method and jig has cut my time in half and increased the quality. On my sketch, items 2A, 2E, 2D, and 2F are the new additions to an old jig. I have made a few small changes. For the lack of a name, I will call this a “hair holder.” Item 2A swings aside to place hair over sponge rubber. The half of a 1/8" dowel holds the hair in place when the wing nuts are tightened. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on July 24, 2020May 8, 2025 by Dale Phillips Area Tuning the Violin Area Tuning the Violin by Keith Hill Originally published as Guild of American Luthiers Data Sheet #283, 1984 and Big Red Book of American Lutherie Volume One, 2000 See also, Hints for Area Tuning the Violin by Keith Hill Announcements of “discoveries” of the “secrets” of Stradivarius usually are not worth the ink used to print them. When they appear, everyone reads them with the customary curiosity. Then away they are filed along with the hundreds of other such claims. They get dredged up again when someone writes yet another book on the violin. Mindful of this possible fate, I would like to offer an explanation of a discovery that I have made. It is not of the “secrets” of Stradivarius; rather it is, I believe, the acoustical system utilized by the ancient Italian violin makers. The system is simplicity itself. It is possible for anyone who understands it and has normal hearing to use it. Moreover, it requires no measuring equipment save the ears and possibly a monochord. Furthermore, the thicknesses and their inexplicable variants, which so annoy our modern sense of decency when we observe them in the finest violins by Stradivari and Guarneri, occur naturally as a result of this system. Because it is so simple, it is, of course, the last place one would think to look for the answer. I expect that once you are equipped with the following information, you will go to your nearest antique Italian fiddle and look to see if what I am saying is actually there. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on July 8, 2020May 8, 2025 by Dale Phillips Hints for Area Tuning the Violin Hints for Area Tuning the Violin by Keith Hill Originally published in American Lutherie #1, 1985 and Big Red Book of American Lutherie Volume One, 2000 See also, Area Tuning the Violin by Keith Hill In my article “Area Tuning the Violin” I presented my discovery of one of the theoretical principles governing the acoustical quality of the violins made by Stradivarius and his numerous Italian contemporaries. Because I believe that the area-tuning principle is the most important of all the acoustical principles pertinent to violin making, I deemed it best to present it in isolation. I would be less than open with you if I did not say that the American Acoustical Society and the Catgut Acoustical Society both rejected the worthiness of the area-tuning principle. I feel that their reasons were full of vested self-interest. I tell you what I told them: Paying attention to flexibility of free plates is a waste of time and attention. Consider the following points. First, thousands of violins have been made using this notion for the last century, yet no consistently superior results have been produced. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on May 21, 2020May 8, 2025 by Dale Phillips Systems Analysis of the Violin Systems Analysis of the Violin by A.F. Standing Originally published as Guild of American Luthiers Data Sheet #173, 1981 My first introduction to the violin was my father’s playing, and I remember, young as I was, a fascination with its strange shape and even stranger sound. From that time to this I had no further contact with the instrument until I met professionally (we are computer programmers) a young lady whose many talents include that of violin making. My interest in old crafts led us into many discussions on the design, construction and adjustment of the violin. As I borrowed, and read, the articles she had collected, I became more and more astounded as from their arcane depths arose the musty odor of eye of toad and toe of newt. With my curiosity and interest aroused it seemed a good idea to consider each part of the violin, the problem it solved, and its interaction with the remainder of the instrument. In this way, once, the basic operation of the instrument was understood, all the second order effects that make all the difference in the real world could be considered as perturbations from the basic instrument. This article was written in an attempt to see if I could, with no musical knowledge or experience whatever, determine by thought alone the modus operandi of the violin. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
