Posted on June 6, 2024May 5, 2025 by Dale Phillips Accelerator for Superglue and More Accelerator for Superglue and More by Chris Pile Originally published in American Lutherie #10, 1987 and Big Red Book of American Lutherie Volume One, 2000 I would like to inform fellow members of recent developments in the cyanoacrylate area of my repair business. The makers of Jet have added two new products to their line which have quickly become indispensable in the completion of my daily work. The old, reliable Jet and Super-Jet have been joined by Slo-Jet and Jet-Set. If you remember, Jet is the familiar thin, quick-setting superglue, and Super-Jet is thicker and slower to dry. Slo-Jet is even thicker and much slower to dry, consequently filling gaps and holes even better than was previously possible. As a matter of fact, it dries so slowly I’ve no idea how long it would take to cure if I wasn’t using the other new product — Jet-Set. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on June 22, 2020May 22, 2025 by Dale Phillips Brazilian Guitar Makers Brazilian Guitarmakers by Roberto Gomes Originally published in American Lutherie #33, 1993 and Big Red Book of American Lutherie Volume Three, 2004 The guitar has been the main musical instrument in Brazil since it was brought by the Portuguese colonizers centuries ago. In those times, Baroque guitars were the most common string instruments. They had five courses of gut or wire strings. Since then it hasn’t changed much, as we can see in the “Brazilian viola” which is used for a kind of Brazilian country music called musica sertaneja (countryside music). The shape of the soundbox of this viola today resembles more a small classic guitar. Unfortunately there are very few records of those times, making it difficult to make a better study of those guitars and their makers. It’s known that most of the instruments were made in Portugal, Italy, and France. The first decade of this century brought three immigrant families from Italy: the Gianninis, the DiGiorgios, and the DelVecchios. These families were luthiers in their country of origin and later they founded the main Brazilian guitar factories which became the backbone of Brazilian-made guitars for nearly eighty years. They made mostly classic guitars and some violins, along with Brazilian violas. They also made mandolins, first with vaulted backs like lutes and later with flat backs, which are used to play choro music. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on January 19, 2010September 9, 2025 by Dale Phillips Review: Shoptalk 6 Review: Shoptalk 6 Reviewed by John Calkin Originally published in American Lutherie #73, 2003 and Big Red Book of American Lutherie Volume Seven, 2015 Shoptalk 6 Stewart-MacDonald Video, 90 minutes, 2002 www.stewmac.com I look forward to each new edition of the Shoptalk videos. They show off the new Stew-Mac tools in the best soft-sell manner by simply demonstrating how they work in a real guitar shop; and on top of that there is always plenty of good randomly gathered information that has nothing to do with selling stuff. The camera work has become excellent, Stew-Mac has developed a fine team of on-camera luthiers, and the cost of the videos is always too low to pass up. You couldn’t beat that combination with a stick. Dan Erlewine leads off with an exhibition of nifty new tools. The BridgeSaver is a set of small hand tools used to repair worn bridge plates and to restore the bridge-pin area of guitar tops. Removing a shot bridge plate has become a last-ditch effort that is frowned upon by vintage folks who wish to maintain instrument originality as much as possible, and by luthiers because it is time consuming and sometimes dangerous to the guitar top. The BridgeSaver removes wood around wallowed-out or misplaced bridge-plate material and/or top material and cuts a mating disk of new wood (not included) to precisely mate with the newly formed hole. The exact procedure is better seen than described. The catalog pictures are good enough to give you the idea, but the video ought to light you up if you’ve done any old-style bridge-plate work in the past. Become A Member to Continue Reading This Article This article is part of the Articles Online featured on our website for Guild members. To view this and other web articles, join the Guild of American Luthiers. For details, visit the membership page. MEMBERS: login for access or contact us to setup your account.
