Review: Building the Kamanché by Nasser Shirazi

Reviewed by Barbara Goldowsky

Previously published in American Lutherie #92, 2007

Building the Kamanché
by Nasser Shirazi
Includes full-scale plan
Available from Nasser Shirazi
P.O. Box 4793, Walnut Creek, CA 94596
$30, including shipping and handling

The kamanché is a traditional Persian stringed instrument, widely played in classical Iranian music ensembles in Iran and other Middle Eastern countries, which is thought to be one of the ancestors of the violin. It appears often in historical paintings and has been described in literature by travelers to Iran and other Middle Eastern countries as early as 1418AD, but it dates back as far as 1500 to 2000 years. The word “kamanché” means “small bow” in Farsi. The general shape has remained the same throughout its history, but changes have been made in construction techniques and materials. Steel strings similar to violin strings replaced silk strings, and, in the past century, the number of strings was increased from three to four.

Approximately 35" in length overall, the kamanché is a spike fiddle, held upright as the player sits on the floor and braces the instrument on his calf or the floor. The instrument is slightly rotated by the player, who uses a variable-tension horsehair bow.

The kamanché has a round hardwood neck; a soundbox made either from a gourd, coconut shell, or from wood that has been carved or bent; a worked metal spike on the bottom; and pegs carved from walnut, maple, or sometimes ebony. The soundbox, fingerboard, pegs, and crown may be decorated with bone, shell, exotic woods or semiprecious stones. Makers interested in building a kamanche will have to find the somewhat unusual materials needed to cover the opening of the soundbox — for instance baby lamb skin (commonly used in Iran), fish skin, or pericardium (the membrane around a cow’s heart). If the above are not available, you may substitute deer skin.

Become A Member to Continue Reading This Article

This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page.

If you are already a member, login for access or contact us to setup your account.

Constructing the Middle Eastern Oud with Peter Kyvelos, Part Two

by R.M. Mottola

previously published in American Lutherie #95, 2008

See Also,
“Constructing the Middle Eastern Oud with Peter Kyvelos, Part One” by R.M. Mottola

The Top

The top of the oud is “flat” and features ladder bracing and one to three sound holes with fretwork rosettes in them. However, the top is constructed to either passively encourage or actively shape the kind of bellied-in-front-of-the-bridge, humped-up-behind-the-bridge distortion common to all instruments with string anchors at the glued on bridge. More on this in a bit.

Peter uses German spruce for his tops and he generally joins and then thickness sands tops well in advance of building, inventorying the joined tops for years before actually using them (Photo 1). Finished top thickness will average around 2MM, depending on the stiffness of the wood, so tops are thickness sanded accordingly at this point.

The first steps in preparing the top are to cut it to shape and then mark and cut channels for the sound hole purfling (Photo 2). He uses a custom made fly cutter to cut the channels. His purfling scheme is pretty simple, and he generally uses black and white fiber violin purfling strips for this. The ends of the purfling strips are mitered and dry fitted before being glued. There is no fingerboard extension to hide the butt joint, so this work is a bit finicky (Photo 3). The purfling is glued into the channels and then scraped down once the glue dries. Then the sound holes are cut out.

Category: other