Posted on March 7, 2024June 6, 2025 by Dale Phillips Hardanger Fiddle Hardanger Fiddle by E.M. Peters Originally published in American Lutherie #7, 1986 The Hardanger fiddle differs from the conventional violin in several respects. Most apparent is the fact that it has eight strings. It has four strings which are bowed in the usual manner, and in addition it has four strings on a lower level, running under the fretboard. These lower four, sympathetic strings resound to the vibration of the four upper strings when these are stroked with the bow. There are other differences between the Hardanger fiddle and the common fiddle, too. The bridge and the fingerboard are flatter, making it easier to stroke two strings at the same time. Much of the time they are stroked two at a time, one open and one stopped. The usual fiddle is tuned one way (E, A, D, G), but the Hardanger fiddle, in the hands of an expert, may be tuned in over twenty ways. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on March 7, 2024May 14, 2025 by Dale Phillips The Santur The Santur by Javád Náini Originally published in American Lutherie #92, 2007 Also see, Introducing Santur by Javád Náini The santur is a traditional Persian dulcimer which is played with two light wooden hammers. Its isosceles trapezoidal shape, tuning plan, and playing methods are similar to the American hammered dulcimer and East Indian santoor. Origins of the santur trace back to ancient Persians in the Middle East, India, and perhaps ancient China. Modern santur design, however, is most likely no more than two centuries old. In this article, we focus on the design that is most popular in contemporary Iran or Persia. The santur provides over three octaves of musical notes (e–f ´´´ or ≈164Hz–1396Hz), with eighteen unison courses of four strings. The strings in each course share the same chessman-style bridge. There are two columns of nine bridges; bass courses are on the right, treble courses on the left. Treble bridges divide each course into a higher and middle octave. This provides two consecutive octaves of notes, with one additional overlap note. The strings running to the right side of the bass bridge are not played. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on March 6, 2024May 14, 2025 by Dale Phillips Building the Kamanché Building the Kamanché by Nasser Shirazi Originally published in American Lutherie #4, 1985 and Big Red Book of American Lutherie Volume One, 2000 The word kamanché in the Persian language (Farsi) means “small bow.” This instrument, with varying shape, size, and material, is widely used in Middle Eastern countries. The kamanché described in this article is modeled after the Persian (Iranian) instrument. The kamanché is a very old instrument and possibly dates back as much as 1500–2000 years, being another form of the ancient Indian ravanstron. In 1418 A.D. Ben Abd-ul-Cadir wrote a treatise (the manuscript of which is in the University of Leyden) which shows that its existence today has changed little since that time. A 16th-century Iranian miniature painting in the Khamza of the poet Nizami shows a kamanché very similar to the one described below. Various early European travelers to Iran have described it also. Among these are Sir W. Ouseley in 1819,1 and Sir Percy M. Sykes.2 Sykes describes a kamanché in Khorasan, an eastern province of Iran, as follows: “...made of walnut wood. The total length is 37", with fingerboard 9" in length. The instrument is handled like a violoncello; but in shape resembles a mandolin with a long spike of worked iron. The belly is constructed from a pumpkin covered with parchment and mounted with stripes of bone radiating from a turquoise. The neck is pierced on each side with three holes, and with a hollow at the back, 3" in length; there are three wire strings and six pegs, three of which are dummies. The bow resembles our double-bass bows and is 22" in length; it is made of gypchin wood and has a strap and a loop with which to tighten the horsehair. To complete the equipment, a bit of beeswax is tied on to serve as rosin.” Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on October 31, 2022May 16, 2025 by Dale Phillips Building the Prima Gusli Building the Prima Gusli by James H. Flynn Originally published in American Lutherie #27, 1991 and Big Red Book of American Lutherie Volume Three, 2004 The Gusli is a very old Russian folk musical instrument. Most probably, it dates back to the 11th century. The gusli is a Russian version of the ancient dulcimer or psaltry. Also in the same family, although different, are the Finnish kantele and the Hungarian cymbalom. Over time, the gusli has changed to accommodate a wide range of musical situations. Today, with especial thanks to the great V.V. Andreev (American Lutherie #17, see Big Red Book of American Lutherie Volume Two, p. 180), one must be specific in describing the gusli because of the many styles. The largest of the guslis, both in physical size and musical range is the piano gusli which is shown in Fig. 1. This instrument stands on four legs (which are detachable to facilitate moving) and has a musical range of five octaves. The keyboard, which is one octave wide, is manipulated with the fingers of the left hand while the right hand works over the exposed strings with a plectrum. Activating the keyboard lifts the dampers on certain strings in all octaves. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on September 2, 2022May 23, 2025 by Dale Phillips A Method for the Design of the Guitar Body Outline A Method for the Design of the Guitar Body Outline by R.M. Mottola Originally published in American Lutherie #97, 2009 See also, Parametric Models of Guitar Cutaways by R.M. Mottola A Method For the Design Of the Guitar Body Outline Part 3: Compound Radius Curves by R.M. Mottola One of the most tedious and time consuming aspects of designing a new guitar for me is the process of designing the body outline. The body outlines of my early instruments were the results of many hours of labor, usually over the course of many weeks. This process was so time consuming that I would often forgo it entirely, opting to reuse an existing body outline as is, or scaling up a guitar outline for use in an acoustic bass guitar. But over the years I’ve settled into a method for guitar body outline design which is far less tedious and consumes far less time than did my original efforts. This method involves the use of a standard model of the guitar outline. Use of this standard model helps to make the process of developing an outline more standard as well, and this in turn has resulted in the development of techniques which save time and frustration. In this article I will be outlining the model and discussing some common guitar body types in the context of this model. In talking about the design method which makes use of the model, I’ll try to touch on some of the generic qualities of guitar body outlines and how they can be quantified in terms of the model. Finally, some of the tools and techniques of the method will be detailed. Please note that what I am discussing here is only the mechanical aspects of a body design. Issues of acoustics or ergonomics are not covered. Also note that this method works equally well with either pencil and paper or CAD drawing tools, although there are some differences in how these tools are used. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
