Posted on January 19, 2010September 9, 2025 by Dale Phillips Review: Shoptalk 6 Review: Shoptalk 6 Reviewed by John Calkin Originally published in American Lutherie #73, 2003 and Big Red Book of American Lutherie Volume Seven, 2015 Shoptalk 6 Stewart-MacDonald Video, 90 minutes, 2002 www.stewmac.com I look forward to each new edition of the Shoptalk videos. They show off the new Stew-Mac tools in the best soft-sell manner by simply demonstrating how they work in a real guitar shop; and on top of that there is always plenty of good randomly gathered information that has nothing to do with selling stuff. The camera work has become excellent, Stew-Mac has developed a fine team of on-camera luthiers, and the cost of the videos is always too low to pass up. You couldn’t beat that combination with a stick. Dan Erlewine leads off with an exhibition of nifty new tools. The BridgeSaver is a set of small hand tools used to repair worn bridge plates and to restore the bridge-pin area of guitar tops. Removing a shot bridge plate has become a last-ditch effort that is frowned upon by vintage folks who wish to maintain instrument originality as much as possible, and by luthiers because it is time consuming and sometimes dangerous to the guitar top. The BridgeSaver removes wood around wallowed-out or misplaced bridge-plate material and/or top material and cuts a mating disk of new wood (not included) to precisely mate with the newly formed hole. The exact procedure is better seen than described. The catalog pictures are good enough to give you the idea, but the video ought to light you up if you’ve done any old-style bridge-plate work in the past. Become A Member to Continue Reading This Article This article is part of the Articles Online featured on our website for Guild members. To view this and other web articles, join the Guild of American Luthiers. For details, visit the membership page. MEMBERS: login for access or contact us to setup your account.
Posted on January 12, 2010May 29, 2025 by Dale Phillips Review: Archtop Guitar Master Class Series Part 1: Focusing on Bridges and Tailpieces by Bob Benedetto Review: Archtop Guitar Master Class Series Part 1: Focusing on Bridges and Tailpieces by Bob Benedetto Reviewed by John Calkin Originally published in American Lutherie #64, 2000 and Big Red Book of American Lutherie Volume Six, 2013 Video: Archtop Guitar Master Class Series Part 1: Focusing on Bridges and Tailpieces Bob Benedetto, 1999 As a hard-core advocate of video learning, I wish I could give this tape the hearty recommendation I gave to Benedetto’s multi-tape series about archtop construction. I’d like to confess that I’m not a builder of archtops, nor do I intend to become one, so it’s likely that I’m not the best judge of advanced information about the subject. It seems to me, however, that there just isn’t $40 worth of information here. There’s an unwritten rule that a reviewer should never divulge so much that the reader feels justified in not making a purchase, but just for one time I’m going to violate that rule. Here’s the gist of this video: First, the break angle of the strings as they pass over the bridge has nothing to do with the tension of the playing length of the string, nor does the length of the string between the bridge and the tailpiece. Second, the standard Gibson-style adjustable bridge is the appropriate one for the archtop guitar, and any change to its footprint or the adjustment mechanism is bound to have an adverse effect upon the tone and/or volume of the guitar. Third, metal tailpieces by their very nature damage the tone of archtop guitars. Why are these things true? They just are, that’s all. The video isn’t much more specific than that. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on January 6, 2010May 20, 2025 by Dale Phillips Review: Violin Set-Ups and Adjustments by Dan Erlewine and Paul Newson Review: Violin Set-Ups and Adjustments by Dan Erlewine with Paul Newson Reviewed by George Manno Originally published in American Lutherie #11, 1987 and Big Red Book of American Lutherie Volume One, 2000 Violin Set-Ups and Adjustments Dan Erlewine with Paul Newson VHS videotape (90 minutes) Stewart-MacDonald $26.95 from Stewart-MacDonald (1999) Teaching violin repairs from a television set! This first struck me as a most inane idea. My thoughts quickly changed after watching the first five minutes of this tape. Paul Newson is a fine repairman, and with Dan Erlewine’s commentary, this tape on violin repair and adjustments is a very good shop aid for a young luthier just starting out. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
