Posted on February 23, 2026February 23, 2026 by Dale Phillips Meet the Maker: David Cohen Meet the Maker: David Cohen by Roger Alan Skipper Originally published in American Lutherie #99, 2009 DR. Dave Cohen, of Cohen Musical Instruments, crafts guitars, mandolins, mandolas, octaves, and mandocellos in Richmond, Virginia. During a sabbatical from the chemistry classroom, Dave seized the opportunity to study the mandolin’s vibrational properties with Dr. Thomas Rossing at Northern Illinois University. From this and other studies he has produced a number of lectures and publications to complement his instruments. Dave, your website mentions a “lifelong interest in science, woodworking, and stringed instruments.” What kinds of woodworking did you do prior to lutherie? My grandfather was a carpenter, and my dad was a civil engineer. Dad knew I’d value something I made more than something I bought, so as a kid, I was always making things with my dad, using my grandfather’s tools. Between the early ’70s and the mid-’90s, I built furniture, mostly casework, that was strongly influenced by James Krenov and Sam Maloof. They still influence my stringed-instrument design. Lutherie is woodworking. Lutherie, though, integrates my background in science and mathematics, and music. I love that part of it. If lutherie were simply reproducing the instruments of the past, I doubt that I would have made more than a few instruments. Become A Member to Continue Reading This Article This article is part of the Articles Online featured on our website for Guild members. To view this and other web articles, join the Guild of American Luthiers. For details, visit the membership page. MEMBERS: login for access or contact us to setup your account.
Posted on March 1, 2025May 13, 2025 by Dale Phillips Meet the Maker: Stan Werbin Meet the Maker: Stan Werbin By Roger Alan Skipper Originally published in American Lutherie #108, 2011 I met Stan Werbin, owner of Elderly Instruments in Lansing, Michigan, in 2009 at the Midwest Banjo Camp he directs along with Ken Perlman in nearby Olivet, Michigan. It was clear then that Stan is a busy man, but I didn’t realize just how busy until I tried to arrange an interview. Our schedules finally meshed, however, and with his office door closed to the business without, I found him relaxed and forthcoming. Stan, you’ve been a member of the Guild of American Luthiers, even back when, as Tim Olsen says, “there was not much to show but a good idea and a naïve willingness to try.” Yet you’re not a builder. What’s the attraction? In the early days of Elderly Instruments, I was just trying to learn to repair instruments so I could fix the ones we had for sale, but I didn’t really have the time required to get good at it. Before we even had a repairman on staff, I’d farm out repairs to Jeff Elliott, who lived here in the early- to mid-1970s. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on March 1, 2025May 13, 2025 by Dale Phillips Thoughts on 12-String Guitars Thoughts on 12-String Guitars by Roger Alan Skipper Originally published in American Lutherie #113, 2013 We at the Guild of American Luthiers are quite often asked about 12-string guitars: What should be done to beef up a 6-string guitar plan to make it suitable for a 12-string configuration? What have the major builders done in the past, and how successful were their efforts? What are current builders doing? To find the answers to these questions, we queried several experienced luthiers: Dana Bourgeois of Pantheon Guitars in Lewiston, Maine ◆ Frank Ford of Gryphon Stringed Instruments in Palo Alto, California ◆ Charles Freeborn of Freeborn Guitars in Portland, Oregon ◆ David Freeman of Timeless Instruments in Tugaske, Saskatchewan ◆ Evan Gluck of New York Guitar Repair in Manhattan, New York ◆ John Greven of Greven Guitars in Portland, Oregon ◆ George Gruhn of Gruhn Guitars in Nashville, Tennessee ◆ Arnold M.J. Hennig of Elderly Instruments in Lansing, Michigan ◆ Bruce Petros of Petros Guitars in Kaukauna, Wisconsin ◆ Andy Powers of Taylor Guitars in El Cajon, California ◆ Tim Shaw of Fender Guitars in Scottsdale, Arizona ◆ Marc Silber of Marc Silber Music in Berkeley, California ◆ Robert Steinegger of Steinegger Guitars in Portland, Oregon. Though this article is arranged as though we were having a roundtable discussion, it was assembled from individual responses; differing opinions are simply the results of varying experiences, rather than dissension. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on March 1, 2025May 13, 2025 by Dale Phillips Inside the Elderly Repair Shop Inside the Elderly Repair Shop by Roger Alan Skipper with Joe Konkoly Originally published in American Lutherie #108, 2011 With eight repair guys in Elderly’s main shop, and three more working on setup, Joe Konkoly’s job as repair shop manager is both challenging and rewarding. The setup department handles new instruments and also helps coordinate the used instrument evaluations with the appraisal department. Every instrument that comes through the store, including new instruments and those at Elderly’s on consignment, visits the repair shop for inspection and setup. The main shop handles customer repairs in addition to all restoration and customization: neck resets, refretting, bridge work on acoustic guitars, electronics customization and repair and, finish work, and lots of banjo and mandolin repairs. Elderly’s wide variety of customers come with an equally diverse array of needs. While some are working in the studio, others simply want to sell a guitar for badly needed cash. Joe says that it’s tough to meet all those expectations, but it’s equally rewarding to meet them and make someone happy. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on June 30, 2024May 14, 2025 by Dale Phillips Meet the Maker: James Ham Meet the Maker: James Ham by Roger Alan Skipper Originally published in American Lutherie #102, 2010 Professional luthier James Ham operates from a shop in Victoria, British Columbia. Though he continues to repair and restore violin-family instruments and bows, he is perhaps best known for his construction of world-class double basses. Mr. Ham is a board member of the Catgut Acoustical Society and a founder of the VSA Festival of Innovation. His time and talents are in great demand, but he graciously found the time to respond to yet another inquiring writer. You’ve been involved with lutherie for a long time, and you’ve achieved some real success. Your name appears often in the upper echelons of the double bass and cello worlds, where you’re widely known as a superb craftsman and a remarkable innovator. Tell me a bit about how you started. Become A Member to Continue Reading This Article This article is part of the Articles Online featured on our website for Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 3 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. MEMBERS: login for access or contact us to setup your account.
