Posted on

End Mill Cutters

End Mill Cutters

by Bruce Scotten

Originally published in Guild of American Luthiers Data Sheet #149, 1980 and Lutherie Tools, 1990

 

The use of routers to cut channels for binding, purfling, and rosettes is quite common. One problem associated with this tool is tearing and chipping caused by the use of standard router bits. A simple solution is to replace router bits with end mill cutters. Their advantages are: the increased number of cuts per revolution (4, 6, or even 8 flutes or edges, compared to 1 or 2 on router bits); plus the right-hand cut, left-hand spiral option which cuts with a downward motion that prevents the hairing and tearing caused by right-hand spiral lifting, and the slapping effect of straight router bits.

End mills are more expensive than Stanley or Sears router bits. Solid carbide, 1/4" shank, 1/4" cutter, right-hand cut, left-hand spiral end mills are about $20. However, decreased down time and improved product performance make end mills a sensible alternative for the serious luthier.

End mills are used more in metal working than wood working. Therefore any machine shop should be able to direct you to a jobber specializing in cutters. Johnson Carbide products in Saginaw, Michigan is a reliable source for end mills if you have difficulty locating them in your area. ◆

Posted on

Antonius Stradivarius in South Dakota

Antonius Stradivarius in South Dakota

by Joseph R. Johnson

Originally published in American Lutherie #12, 1987 and Big Red Book of American Lutherie Volume Three, 2000



When the name Antonio Stradivari (1644–1737) is mentioned, images of fine quality violins, master craftsmanship, and exor­bitantly large price tags come to mind. Stradivari is known to the world primarily as an excellent violin maker. However, the members of the violin family were not the only stringed instruments that he made. Stradivari’s output also included a harp, three known guitars, and patterns for lutes, mandolins, mandolas, and violas da gamba.

The Shrine to Music Museum in Vermillion, South Dakota, is home to the “Rawlins,” one of three extant guitars made by Antonio Stradivari in Cremona, Italy, between 1680 and 1700. The second is in the Ashmolean Museum at Oxford University in England. The third, much altered and in need of restoration, is privately owned in Italy.

Become A Member to Continue Reading This Article

This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page.

If you are already a member, login for access or contact us to setup your account.