Posted on

The Acoustical Characteristics of the Concert Cimbalom

The Acoustical Characteristics of the Concert Cimbalom

by Janos Pap

Originally published in American Lutherie #61, 2000



We may be surprised that the sound of the concert cimbalom, or Hungarian hammered dulcimer, is occasionally similar to that of the piano. But we can be sure that it is not a piano, only related to it. The cimbalom produces a little more nasal sound, with a rougher timbre. The acoustical differences derive from the construction of the instrument and the manner of playing. I have devoted much time to making acoustical measurements on concert cimbaloms at the Acoustic Research Laboratory of the Hungarian Academy of Sciences in an anechoic chamber, and on a cimbalom model at the Institute of Musicology at Cologne University, hoping to satisfy my curiosity about the causes and effects of the cimbalom’s sound.

In instruments of the hammered dulcimer family, the form is determined by the mode of playing. The player strikes the strings with two hammers. The strings must be divided to give a large range of notes, and the struck parts of the strings must be raised for playability. The string-dividing determines the damping features, and thus the timbre and the decay. The raising of the strings results in high downward force on the bridge, which determines the sound indirectly, by the mode of energy transport and radiation.

Become A Member to Continue Reading This Article

This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page.

If you are already a member, login for access or contact us to setup your account.
Posted on

Small Bow for Psalteries and Dulcimers

Small Bow for Psalteries and Dulcimers

by Tony Pizzo

Originally published as Guild of American Luthiers Data Sheet #38, 1976



This data sheet provides plans for a small, simple bow (especially well-suited for bowed psalteries) which I am still in the process of developing. There is no need for frogs and threaded shafting, etc. as the bow hair is held tightly by means of tension. Until information on simple bow making becoms more accessible, bows such as this serve quite well. (The shape is adapted from an illustration in Lynn Elder’s “How to Play the Bowed Psaltery”, and as I developed my bow through a process of trial and error from that initial point, I don’t know how far the similarity carries from there. At any rate thanks to Mr. Elder.)

Materials:

bow — mahogany (or other hardwood 13" × 1 1/4" × 5/8" (or 1/2")
shims — rosewood inlay strip 1" × 1/8"× 1/28"
doweling — 1" lengths of 1/2" and 3/8" diameter dowels
bow hair — approx. 13" length (suggestion..“Chieftain” Nylon Bow Hair available from International Violin Co./1421 Clarkview Road, Suite 118/Baltimore, MD 21209.

Become A Member to Continue Reading This Article

This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page.

If you are already a member, login for access or contact us to setup your account.
Posted on

The Cimbalom

The Cimbalom

by Alexander I. Eppler

Originally published in American Lutherie #5, 1986 and Big Red Book of American Lutherie Volume One, 2000



The cimbalom is by far the most sophisticated and highly-developed instrument of the hammered dulcimer world. It enjoys the status not only from the point of view of musical performance, standards, and practice, but also from that of actual construction and design.

The appearance of the instrument is rather grand. Its beautiful carved case stands on four turned legs with a graceful, lyre-shaped pedal. Other than its elegant and compact tuning system (see illustration), what sets the cimbalom apart from all other dulcimers is that it is fitted with a full set of dampers and pedal. The legs and pedal are removable for easy transport, and the instrument also has a lockable cover to protect the strings and dampers when the instrument is not in use.

Become A Member to Continue Reading This Article

This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page.

If you are already a member, login for access or contact us to setup your account.
Posted on

A Contrabass for the Pugo Brothers

Cuenca. They Became Self-Made Luthiers in their El Cebollar Neighborhood. They Make String Instruments.

A Contrabass for the Pugo Brothers

These Artisans had to Desecrate Several Secrets Before Making Violincellos, Contrabasses, Violins, and Guitars.

But they did it.

by Juan Carlos Morales translated by John L. Walker

Originally published in American Lutherie #73, 2003



When Angel Pugo was a young boy he developed a phobia that never went away: fear of school. His teachers’ intolerance, according to him, was the reason that caused him to not sit near the blackboard anymore. “Those that went around barefooted were never well considered,” says Angel, now a violin maker.

His father, Miguel, had heaped rondadores, flautas de pan, pingullos, and ocarinas1 upon his sons while he watched the corn grow on the hillside. After one of his first “traumas,” as Angel calls them, he also hung up his pingullo and headed towards the Conservatory of Cuenca. “They told me that all they did in the conservatory was repeat do, re, and mi, and that it was very boring. But solfège delighted me.”

The musical center’s director looked at him carefully and said, “You are worth it.” This same director, after sitting him in front of a piano, would choose Angel Pugo as a beneficiary of one of the thirty pianos provided by the government of Jaime Roldós Aguilera.2

Become A Member to Continue Reading This Article

This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page.

If you are already a member, login for access or contact us to setup your account.
Posted on

Space Bass

Space Bass

by David Riggs

Originally published in American Lutherie #28, 1991



We have all benefited from advances in technology resulting from the exploration of space. Brave Americans, along with those of other nations, have risked their lives to study the effects of weightlessness in the fields of metallurgy, botany, and others of interest to luthiers. It has, therefore, become my mission to pursue a role in which I may participate directly in this arena of endeavor.

One fascinating experiment is conspicuously lacking; the advantages of its execution in a weightless environment are so obvious it is astounding that nobody has yet done it. Yes, you know what I’m thinking — I want to build a bass in space!

They’ve sent teachers, congressmen, and the towel boy from the Y-Not Bath House. They’ve probably even sent lawyers. But have you seen one newspaper headline that read, “Luthier Loops Into Lunar Orbit”? Well, I aim for you to see that little number splash down in your bird bath one of these bright mornings.

Become A Member to Continue Reading This Article

This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page.

If you are already a member, login for access or contact us to setup your account.