Posted on August 11, 2021March 5, 2024 by Dale Phillips Floyd Floyd by Nicholas von Robison Originally published in American Lutherie #37, 1994 KERplunkit! I reduced speed hoping the noise would go away, but no such luck. I had been traveling up US 395 from Los Angeles, and for the last half-hour I had not seen another vehicle, village, or even a gas station. Just dust, sage, and a few billboards. Then, RANDSBURG — 35 MPH. I dutifully slowed and glimpsing a hand-painted GARAGE sign, pulled over and shut her down in front of the big double doors. I squatted behind the left rear wheel and saw that the rubber bushing on the shock absorber had deteriorated and come off, so that the shock was metal-to-metal on the stud. Sensing a presence beside me, I turned, and was about six inches away from a pock-marked face with three days of salt-and-pepper stubble. He grinned — no teeth and purple gums. I caught a whiff of unwashed socks and potato skins. Another nanosecond and the potato smell registered as vodka. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on August 11, 2021March 6, 2024 by Dale Phillips Jack Batts Jack Batts An interview by Jeff Feltman Originally published in American Lutherie #10, 1987 and Big Red Book of American Lutherie Volume One, 2000 You can walk into a clockmaker’s shop and see fifty clocks. One reads 12:00, another says 11:55, another 12:05. Only one can be right, and it probably isn’t a bad guess that none of them is right. Searching for the right varnish is like being in that clock shop.” “A man could make 150 more violins in his life if he wasn’t so worried about concocting some witches brew. He would do well to spend his time learning to make a fine violin.” Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on August 11, 2021March 6, 2024 by Dale Phillips Stalking the Wild Maple Stalking the Wild Maple by John E. Boser Originally published in American Lutherie #33, 1993 and Big Red Book of American Lutherie Volume Three, 2004 Several years ago I opened a mail-order business without any particular purpose in mind except to offer some unique products. Because I grew up with a mysterious fascination with the violin, somewhere along the line I found myself making fiddles. Since it was my intention to make my instruments affordable, I made them of cherry and various species of pine. The cherry is easy to carve, keeping my time per instrument down, and the pine was hand-selected from the local lumber store. With a few modifications in soundboard thickness, my fiddles performed to my satisfaction (almost). Next it was time to work on appearance; I was becoming a bit bored with the looks of straight-grained cherry. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on June 23, 2021March 6, 2024 by Dale Phillips A Contrabass for the Pugo Brothers Cuenca. They Became Self-Made Luthiers in their El Cebollar Neighborhood. They Make String Instruments. A Contrabass for the Pugo Brothers These Artisans had to Desecrate Several Secrets Before Making Violincellos, Contrabasses, Violins, and Guitars. But they did it. by Juan Carlos Morales translated by John L. Walker Originally published in American Lutherie #73, 2003 When Angel Pugo was a young boy he developed a phobia that never went away: fear of school. His teachers’ intolerance, according to him, was the reason that caused him to not sit near the blackboard anymore. “Those that went around barefooted were never well considered,” says Angel, now a violin maker. His father, Miguel, had heaped rondadores, flautas de pan, pingullos, and ocarinas1 upon his sons while he watched the corn grow on the hillside. After one of his first “traumas,” as Angel calls them, he also hung up his pingullo and headed towards the Conservatory of Cuenca. “They told me that all they did in the conservatory was repeat do, re, and mi, and that it was very boring. But solfège delighted me.” The musical center’s director looked at him carefully and said, “You are worth it.” This same director, after sitting him in front of a piano, would choose Angel Pugo as a beneficiary of one of the thirty pianos provided by the government of Jaime Roldós Aguilera.2 Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on June 1, 2021March 6, 2024 by Dale Phillips Trends: 1985 Lute Society Seminar Trends: 1985 Lute Society Seminar by Lawrence D. Brown Originally published in American Lutherie #3, 1985 The 1985 Lute Society Seminar in Oakland, Michigan, June 16-22, was attended by 50 students, 5 professional luthiers, 7 faculty, and 3 guest speakers. The students included serious amateurs, professional and semi-professional players, and rank beginners. They came from as far away as Japan, Europe, Canada, and England, providing a fascinating cross-section of players and instruments from around the world. Since many of those attending brought two or sometimes three instruments, a great many instrument makers were also represented. For me, as a full-time builder of lutes and other early instruments, it represented an unparalleled opportunity to examine the quality of instruments currently being made by a great variety of makers, and to identify any trends in playing techniques (which can greatly effect the mechanics of a musical instrument). Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
