Posted on

Questions: Santuri

Questions: Santuri

by Peter Kyvelos

Originally published in American Lutherie #91, 2007

See also,
Questions: Santuri by Roger Reid

 

Steven Bernstein from the Internet asks:

In Zorba the Greek, Zorba played a Turkish instrument called the santuri. If you could point me toward a photo of it, or better yet plans and recorded music, I’d like to know more about what Kazantzakis, the author, was talking about.


Peter Kyvelos of Belmont, Massachusetts,
replies:

The sandouri or santouri (most common English spellings) is an instrument of the hammered dulcimer type. They are common in Greece and are related to the much smaller Persian santur. Pictured is a sandouri built by Chris Pantazelos in our shop, Unique Strings. I know of no plans for the instrument. There are recordings that feature the instrument, such as Axion Esti, written by Mikis Theodorakis, composer of the soundtrack for the movie version of Zorba. ◆

Photo by R.M. Mottola

See also,
Questions: Santuri by Roger Reid

Posted on

Letter: Kenny Hill Responses in AL#98

Letter: Kenny Hill Responses in AL#98

by Alan Carruth

Originally published in American Lutherie #100, 2009



Tim —

I found Kenny Hill’s response (in AL#98) to R.M. Motolla’s study of ports (in AL#96) interesting. I’m not going to answer every point he made; some are more properly addressed by R.M. himself. However, there are a couple of things I would like to comment on.

Kenny wrote: “I’m guessing that Al’s cool Corker was not really constructed as a concert instrument, that it does a good job at its original intended purpose but was not built to prove or disprove the validity of soundports as a useful design element.”

I think the concept of what is or is not a “concert instrument” is slippery enough that we won’t settle it here. Nobody is likely to appear on the stage with something as rough as the “corker” so that in itself excludes it from that class. I will note, though, that several people, including one very fine maker, have remarked that it is at least “not bad”, and R.M. told me that most of the players had a much higher opinion of it when they were blindfolded.

Become A Member to Continue Reading This Article

This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page.

If you are already a member, login for access or contact us to setup your account.
Posted on

Opinion

Opinion

by Harry Fleishman

Originally published in American Lutherie #74, 2003



As a builder of many years experience, I have my own methods and views. I try to teach, but more important, I try to learn. We each have our own approach and I’d never want to censor anyone’s right to spread their ideas. At this point in my career it is clear that some ideas may seem wrong, but only seem so because of my own limitations. That said, I do feel a need to respond to a recent article that purports to tell ``the truth,’’ exposing other views as false.

John Calkin’s article “The Heretic’s Guide to Alternative Lutherie Woods” in AL#69 offers some very useful information about the working properties of a good assortment of materials. I appreciate the info and will refer to it as I build and teach. However, I think he does a disservice to many luthiers who have worked hard to train their ears and to understand tone. Yes, as John says, “Guitars sound like guitars.” They do not all sound alike, though, as he implies throughout the article. He asserts that, “The concept of tonewood is a hoax.” Then am I a charlatan? I teach that each tonewood has its own qualities that have small but discernible affects on the voice of a guitar. He asks, “Can you tell what a guitar is made of while listening to an unfamiliar recording?” and answers that no one can. Well, I often can. On more than one occasion I have correctly identified the woods used in guitars that I had not seen and was unfamiliar with. On many occasions I have even identified the luthiers who built guitars, based on listening to recordings and recognizing their “voice.” I’d be surprised if many well-trained, thoughtful, and sensitive luthiers cannot do the same. John should not assume that just because he cannot hear these subtleties, no one can. Many people are colorblind, but that does not negate the difference between red and green.

Become A Member to Continue Reading This Article

This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page.

If you are already a member, login for access or contact us to setup your account.
Posted on

Questions: Dobro Plans

Questions: Dobro Plans

by Mike Dotson

Originally published in American Lutherie #87, 2006

 

Charlie S. from the Internet asks:

Can you give me a source for plans to build a Dobro?


Mike Dotson of Phoenix, AZ
responds:

The only readily available plan for a resonator guitar I know of is the one by Paul Beard at Resophonic Outfitters. (www.beardguitars.com. Click “parts,” then “blueprints.”) They also supply all the parts needed. You can get the same plan as well as parts from Stewart-MacDonald (www.stewmac.com). ◆

Posted on

Letter: Experimental Violin

Letter: Experimental Violin

by Robert A. Edelstein

Originally published in American Lutherie #93, 2008



Hi Tim and GAL Staff,

I built this violin to be played at a Suzuki camp our family has attended for the past ten years. Both of our children are players. Just for fun, I tried to break every rule I could think of. The top of the instrument is made of eight pieces of 4" wide, 1/4" craft grade balsa from a hobby shop. I laminated them into two stacks of four boards each, then joined the two stacks side by side to make a blank 8" wide by 1" thick. Balsa is a pleasure to carve, but beware of chipping. The finished top was surprisingly resonant.

I used a carbon/graphite free-floating bass bar made from an old bow and slid into balsa blocks. It could be changed for stiffer or lighter ones depending on player preference. The soundpost is made to function as a very stiff spring; I wanted to see if it could “self adjust.” The neck is carved of mahogany and has a slide-through cam resting against the back which helps do a quick neck adjustment during construction. The headstock uses mini-tuners in a pattern suggestive of a traditional pegbox. For speed of completion, the back and sides are from a Stewart-MacDonald violin kit. Bessie Blum, an artist friend of ours in Cambridge, Massachusetts, did a wonderful decorative finish. The instrument plays well, but is a little top heavy from the mechanical tuners.

Become A Member to Continue Reading This Article

This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page.

If you are already a member, login for access or contact us to setup your account.