Bridge Shaping and Routing Jig

by Paul Woolson

Originally published in American Lutherie #79, 2004 and Big Red Book of American Lutherie Volume Seven, 2015



Ah, the bridge. From my research, this extremely important, yet often overlooked, element of the guitar has had little written about it. Many builders I’ve talked to are so daunted by the task of making bridges that they simply buy them premade and stick them on. To me, this is an injustice to the overall design of the guitar, often making the bridge look like an afterthought.

You might notice that I use a very nontraditional bridge shape (Photo 1). I’ve chosen a design that complements many different elements of the guitars I build. From headstock, to fingerboard extension, to bridge, I try to incorporate the same design elements. I prefer to make all of my bridges from ebony. However, the following information can be used for almost any shape or wood choice, including standard winged bridges. The scallops of the winged bridge would have to be created in another step which could be easily done on a table saw, or by some other method.