Posted on January 19, 2010September 9, 2025 by Dale Phillips Review: Shoptalk 6 Review: Shoptalk 6 Reviewed by John Calkin Originally published in American Lutherie #73, 2003 and Big Red Book of American Lutherie Volume Seven, 2015 Shoptalk 6 Stewart-MacDonald Video, 90 minutes, 2002 www.stewmac.com I look forward to each new edition of the Shoptalk videos. They show off the new Stew-Mac tools in the best soft-sell manner by simply demonstrating how they work in a real guitar shop; and on top of that there is always plenty of good randomly gathered information that has nothing to do with selling stuff. The camera work has become excellent, Stew-Mac has developed a fine team of on-camera luthiers, and the cost of the videos is always too low to pass up. You couldn’t beat that combination with a stick. Dan Erlewine leads off with an exhibition of nifty new tools. The BridgeSaver is a set of small hand tools used to repair worn bridge plates and to restore the bridge-pin area of guitar tops. Removing a shot bridge plate has become a last-ditch effort that is frowned upon by vintage folks who wish to maintain instrument originality as much as possible, and by luthiers because it is time consuming and sometimes dangerous to the guitar top. The BridgeSaver removes wood around wallowed-out or misplaced bridge-plate material and/or top material and cuts a mating disk of new wood (not included) to precisely mate with the newly formed hole. The exact procedure is better seen than described. The catalog pictures are good enough to give you the idea, but the video ought to light you up if you’ve done any old-style bridge-plate work in the past. Become A Member to Continue Reading This Article This article is part of the Articles Online featured on our website for Guild members. To view this and other web articles, join the Guild of American Luthiers. For details, visit the membership page. MEMBERS: login for access or contact us to setup your account.
Posted on January 14, 2010May 28, 2025 by Dale Phillips Review: Getting a Bigger Sound: Pickups and Microphones for Your Musical Instrument by Bart Hopkin with Robert Cain and Jason Lollar Review: Getting a Bigger Sound: Pickups and Microphones for Your Musical Instrument by Bart Hopkin with Robert Cain and Jason Lollar Reviewed by Fred Carlson Originally published in American Lutherie #74, 2003 and Big Red Book of American Lutherie Volume Seven, 2015 Getting a Bigger Sound: Pickups and Microphones for Your Musical Instrument Bart Hopkin with Robert Cain and Jason Lollar ISBN 0-9727313-0-X Nicasio, CA: Experimental Musical Instruments, 104 pp., 2002 www.windworld.com I know I’m not the only electronically challenged luthier who’s been waiting for someone to write an understandable, useful handbook on pickups, microphones, and instrument amplification. I’d been envisioning the author to be lutherie renaissance-man Rick Turner, who wrote the fine “Electronic Answer Man” columns for American Lutherie in years past. I know how busy Rick is, but I remain ever-hopeful that pressure from the lutherie community will drive him to it someday. In the meantime, another of my musical instrument heroes has come out with his take on such a manual, and I’m happy to say it goes a long way toward filling the void in useful introductions to this subject. Bart Hopkins’ take on the adventure of electronically amplifying a musical instrument is undoubtedly coming from a different perspective than one from which a more guitar-oriented writer like Rick Turner would approach it. Bart has spent many years spearheading Experimental Musical Instruments, an organization devoted to interesting and unusual musical instruments of all sorts. For many years, EMI published a journal of the same name that featured all sorts of amazing stuff from the wonderful, quirky, experimental underside of instrument building. Bart did writing and illustrating for the journal as well as editing and publishing duties. He’s also an active guitarist and creative instrument builder/inventor with experience and interests covering a broad spectrum of the music world. Since EMI’s journal ceased publication in 1999, Bart has kept the organization alive as a source of back issues. EMI also offers recordings of many of the wild and wonderful creations featured in the journals’ pages, as well as several books Bart has written on instrument design and building. Recently the EMI catalog has added pickups and pickup components and materials to its stable of offerings. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on January 12, 2010May 29, 2025 by Dale Phillips Review: Installing Transducer Pickup Systems by Dan Erlewine Review: Installing Transducer Pickup Systems by Dan Erlewine Reviewed by John Calkin Originally published in American Lutherie #65, 2001 and Big Red Book of American Lutherie Volume Six, 2013 Video: Installing Transducer Pickup Systems Dan Erlewine Stewart-MacDonald, 1999 The music stores for which I used to do guitar repairs used to sell transducers at a hefty discount, then charge a flat $25 installation fee. Their normal hourly rate was $33. It’s easy to put in a transducer in an hour or less. Making it function properly is another matter, and many of those guitars came back for adjustments that would never have been necessary had the time been granted to do the job right in the first place. This video is about doing the job right the first time. The guitar top is precisely jacked up to simulate string tension, the saddle slot is routed accurately and with a flat bottom, a new saddle is made, and adjustments are made to the bridge to correct the string angle as it comes off the saddle. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on January 10, 2010May 16, 2025 by Dale Phillips Product Reviews: Acoustech Dynamic Field Pickup Product Reviews: Acoustech Dynamic Field Pickup by Harry Fleishman Originally published in American Lutherie #29, 1992 and Big Red Book of American Lutherie Volume Three, 2004 Acoustech Dynamic Field Pickup Acoustech Orangeburg, NY My first attempt at guitar amplification was an early ’60s DeArmond pickup on my f-hole Gibson acoustic. It attached with little difficulty or damage and sounded great to me at the time. That was 1962 and my expectations were not terribly high. I plugged straight into a portable Wollensak tape recorder and used it as an amp until I got a used Gibson Falcon as a Christmas gift. A few years later, I installed a roundhole DeArmond in my Gibson J-45. Again, it sounded pretty good, all things considered. But all the things I considered didn’t amount to much. What choices did I really have, after all? Those little contact mikes, which stuck on the face of a guitar, weren’t very good; I learned that soon enough. And the good-sounding microphones were expensive, unwieldy, and restricting. Like many guitarists, I wanted the freedom of movement that a pickup could give. When the first piezo transducer came out, I stuck one on and boogied. By that time, however, I was more sophisticated, more discerning, more caught up in the folk boom, and wanting a pickup that sounded like an acoustic guitar, only louder. The first I tried was the Barcus-Berry. Not too bad if you didn’t mind sounding like you were inside a bucket. The similar piezos weren’t much better. The Hot Dot sounded great to me when it came out. Like many technological improvements, its refinements masked its shortcomings for a while. I probably installed a hundred of them while continuing my search for a better sounding, easier installing pickup for myself and the customers I was attracting to my repair and building business. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
