Posted on July 1, 2022May 19, 2025 by Dale Phillips Let’s Get Busy Let’s Get Busy Chris Brandt Says You Can’t Succeed in Business Without Really Trying by Jonathon Peterson Originally published in American Lutherie #26, 1991 and Big Red Book of American Lutherie Volume Three, 2004 When he was eleven, Chris Brandt converted a $13 guitar into a 12-string by installing autoharp pins. He now owns a successful repair shop in the Portland area. I visited him there to find out how he makes it work. Chris, you have almost always worked with other luthiers, either as an employee, in a cooperative shop, or as an employer of several repairmen. You seem to prefer working with others. Why is that? There are a lot of benefits to working in a shop with other repairmen. It’s a rich learning situation. You are exposed to so many more instruments. It enables you to specialize more, and conversely, to not specialize where you don’t need to. There are a lot of jobs which I don’t do anymore simply because I don’t need to and they’re not my preferred jobs. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on July 1, 2022May 28, 2025 by Dale Phillips Some Traditional Vietnamese Instruments Some Traditional Vietnamese Instruments by Andy DePaule Originally published in American Lutherie #74, 2003 and Big Red Book of American Lutherie Volume Seven, 2015 Most of the traditional Vietnamese instruments are like other instruments found all over Asia. For instance, the dan tran is like a Japanese koto but has sixteen steel strings and is smaller. The dan ty ba is similar to the Chinese pipa. The dan nguyet, or moon lute, looks a bit like a banjo, but has a wood top and sounds like a nylon string guitar. They bend the strings between the high frets. And the dan tam thap luc is their version of a hammered dulcimer. But the dan bau, my favorite instrument, is unique to Vietnam. Its one steel string is tuned slack and runs from the small bridge at the lower portion of the face to a bell-shaped piece of rosewood (hollow and turned on a lathe) attached to a “whammy bar” made from black buffalo horn. It is played by palming the harmonic points of the string while picking, then bending up or down to achieve desired notes, as well as to get special effects. The best players also use the whammy bar to raise or lower the note to another pitch prior to picking the string. The resulting music is much like the sound of our pedal steel guitar, my favorite American instrument. In the past, the dan bau was an acoustic instrument, but now it is available with an electric pickup, a simple spool over a magnet that has been wound with fine copper wire. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on July 1, 2022May 28, 2025 by Dale Phillips Questions: Quartersawn Wood Questions: Quartersawn Wood by Alan Ollivant Originally published in American Lutherie #74, 2003 and Big Red Book of American Lutherie Volume Seven, 2015 John Forcade of Poulsbo, Washington asks: I have acquired six large maple rounds and would like to quartersaw them and let them dry out for a few years. They are about 45" long and 3' in diameter. I am not an experienced woodworker so I am looking for some specific directions on how to quartersaw. I would assume I am going to have to split the rounds into fourths by hand and then cut a board off one face, then cut the next board off the opposite face until each quarter is completely cut? Am I on the right track? Also, once I split each round open, how can I determine the quality of the maple? Am I going to be primarily looking for figure? If the wood is good and I keep it, how long should I let it dry before using it? Should it be kept in a controlled environment from day one? I also have some koa from the big island. What differentiates quality koa from average koa? Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on July 1, 2022May 19, 2025 by Dale Phillips It Worked for Me: Violin Bow Hair Storage It Worked for Me: Violin Bow Hair Storage by Al Stancel Originally published in American Lutherie #25, 1991 and Big Red Book of American Lutherie Volume Three, 2004 Storage of violin bow hair might be a problem for some. Here is how we solve it at Casa Del Sol Violins. We make a wire horseshoe, insert it into the big end of the bundle of hair, tie it with dental floss, lightly superglue the hair ends, bend the wire back as shown in the drawing. Hang the bundle from the ceiling with a plastic bow tube slipped over it as a dust protector. The tube can be slid up and over the bundle for cutting individual hanks. The hair never gets dirty or tangled. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on July 1, 2022May 28, 2025 by Dale Phillips Questions: Ebony Tailpiece Cracks Questions: Ebony Tailpiece Cracks by Ted Megas Originally published in American Lutherie #73, 2003 and Big Red Book of American Lutherie Volume Seven, 2015 Susan from cyberspace asks: I have a new custom-made archtop and the ebony tailpiece has developed a few very thin/small cracks. Should I use lemon oil on it? I have a humidifier in the room, but it seems impossible to keep the humidity at a constant level. Ted Megas of Portland, Oregon responds: I would be concerned that the structure of the tailpiece is undermined. A cracked tailpiece is potentially a very dangerous situation, since it’s under a lot of tension. I’ve even heard of tailpieces exploding. Lemon oil will neither fix the cracks nor prevent further cracking. You need to be in touch with the maker of the guitar or a reputable repairperson. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
