Construction of the Colombian Tiple

by Anamaria Paredes Garcia and R.M. Mottola

Originally published in American Lutherie #90, 2007, Big Red Book of American Lutherie Volume Three, 2004



American Lutherie #82 featured an article and plan for the Colombian tiple by Bogotá luthier Alberto Paredes. This is a companion article to that one, featuring a detailed description of how the tiple is constructed in Sr. Paredes’ shop. The design of the tiple is heavily influenced by that of the classical guitar, but as it was not directly descended from the classical, this instrument has unique characteristics. With its multiple courses of steel strings, the construction of the tiple has to be able to withstand much higher static string tension than a classical guitar.

The top is cut from bookmatched spruce, nominally 3MM thick. The two halves are generally cut out on the bandsaw at the same time, as shown in Photo 1. The center seam edges are jointed, first on the jointer (Photo 2). Following machine jointing the top halves are finished up on the shooting board using a hand plane. Note that the halves are simply pressed by hand to hold them down on the board during shooting (Photo 3). Glue is applied to the center seam surfaces (Photo 4) which are then clamped using simple cauls to a flat, waxed gluing board (Photo 5). Once the glue is dry the squeeze-out is stripped off the back side of the top.