Posted on June 6, 2024May 5, 2025 by Dale Phillips Review: Earl Scruggs and the 5-String Banjo Review: Earl Scruggs and the 5-String Banjo Reviewed by James Arial Originally published in Guild of American Luthiers Newsletter Vol 2 #1, 1974 Earl Scruggs and the 5-String Banjo Peer International Corporation 1740 Broadway, New York, N.Y. 10019 This book was published in 1968. It is a comprehensive study of the 5-string banjo including a very well written adn illustrated chapter on banjo construction. The seventeen pages in this section of the book describe all phases of construction except that of making a resonator. There is an excellent segment on inlaying using a unique technique of sandblasting to carve the recesses for fancy work. The book’s $10.95 retail price might scare off the casual luthier, but if you’re interested in Scruggs type picking as well as banjo making it is well worth the price. The technique used by Scruggs is very clearly described in step by step procedure. Thirty-five of his best known songs are presented in easily read tablature. ◆
Posted on June 6, 2024May 22, 2025 by Dale Phillips Letter: Clarification of DVD review in AL#97 Letter: Clarification of DVD review in AL#97 by Ronald Louis Fernández Originally published in American Lutherie #99, 2009 Greetings, I thank Tom Harper for his review of my DVD, French Polishing for Guitarmakers 2.0 in AL#97. I wish to make a few clarifications. My family’s Spanish guitar business in the 1960s never involved Manuel Rodríguez. Rather, we had dealings with Miguel Rodríguez of Cordoba as well as Manuel de la Chica (Granada), Arcángel Fernández, Marcelino Barbero, Felix Manzanero, Hernández y Aguado, Juan Alvarez, and José Ramírez III. My article “Miguel Rodríguez: Some Notes on his Family Tree and Correcting the Historical Record” in AL#68 (Winter 2001) tells about the Miguel Rodríguez family and mentions my dealing with them. In a footnote of that article, I specifically mention the difference between Miguel Rodríguez of Cordoba and Manuel Rodríguez of Madrid. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on June 6, 2024May 28, 2025 by Dale Phillips Questions: Workbench Plans Questions: Workbench Plans by Ellis McMullin and Wolodymyr Smishkewych Originally published in American Lutherie #81, 2005 Kevin from cyberspace asks: Where can I find plans for a guitar builder’s workbench? Ellis McMullin of Kent City, Michigan answers: The short answer is that you can use any workbench with the proper jigs and fixtures. I doubt you will find two identical benches unless they are in the same shop. The longer answer: I recommend The Workbench Book by Scott Landis (Taunton Press, 1998; ISBN: 1561582700) as a guide in choosing a workbench style. In Chapter 14, workbenches used by Dan Erlewine, Ervin Somogyi, Mark Stanley, and Richard Schneider are discussed. A general plan of the bench that Richard used is included in the book. The book is a wealth of information and includes four detailed plans of workbenches in the Appendix. Wolodymyr Smishkewych of Bloomington, Indiana adds: In addition to the Landis book, if you have a spare barber’s or dentist’s chair handy, you might take a look at AL#9, “Barber Chair Workbench” by Michael Sanden (also in The Big Red Book of American Lutherie, Volume One, p. 343). In the end, your bench will be a combination of your needs, ideas both yours and others’, and the materials at hand. And your needs will be dictated by what you build, as in my case: what is the best bench height for hurdy-gurdies? Good luck!
Posted on June 6, 2024May 28, 2025 by Dale Phillips Questions: 3 String Balalaika Tuner Questions: 3 String Balalaika Tuner by Francis Kosheleff Originally published in American Lutherie #71, 2002 Bob Mussro from cyberspace asks: I’m trying to find replacement tuners for a three-string balalaika. Would you have such or know of a source? Francis Kosheleff from Los Gatos, CA responds: The easy solution to the problem is to remove the old tuners, plug the three holes , and get single tuners like Schaller or Gotoh. Drill a hole on the treble side of the peghead for one tuner (steel A string ). Do the same on the other side for the two nylon E strings. The hard solution, if you absolutely need a perfect, identical, replacement is to send somebody you trust to Russia to search for the craftsman or the factory who made your instrument and buy the replacement tuners. (Good luck!) Another (expensive) solution is to have somebody (professional) build a copy of your tuners. And finally you can alter two of the three tuners by making a longer shaft (a small length of thin tubing) that will reach the edge of the peghead from the existing holes. It’s not too difficult to do. I have done that a couple of times. ◆
Posted on June 6, 2024May 29, 2025 by Dale Phillips Letter: About Tusq Letter: About Tusq by Roger Sadowsky Originally published in American Lutherie #71, 2002 Dear Tim, In regard to Fred Carlson’s review of Tusq in AL#70, I have recently become a fan of Tusq saddles for under-saddle pickups. I’ve always struggled for good string-to-string balance and have tried every material and every trick in the book. I even published an article in another guitar publication about the fine art of achieving string balance with under saddle pickups. Building my Electric Nylon Guitar gives me an opportunity to evaluate materials under relatively controlled conditions. In the last twelve years I’ve built over 300. For years the best material I used was Micarta, but I frequently had to make three or four saddles per guitar to find the one that had the best string balance. Recently I tried Tusq and had perfect string balance on the first try. I have used it now for about six months and in every situation, I have had perfect string balance with the first saddle I made. For other applications I can appreciate the benefits of bone and ivory. But when it comes to string balance with an under saddle pickup, nothing is better than Tusq. ◆
