Greven Images

John Greven Demonstrates His Inlaying and Engraving Methods

by John Greven

from his 2001 GAL Convention workshop

Originally published in American Lutherie #72, 2002 and Big Red Book of American Lutherie Volume Six, 2013



In over forty years in this business, I’ve developed my own way of doing things. Today I’m going to show you my method for cutting the inlay out of shell or laminate, for cutting the hole for the inlay and gluing it in, and for engraving it to bring it to life. “Don’t try this at home, kids.” It’s my own method, not the gospel. I learned this on my own, and it works better than the standard technique of cutting pearl by hand for me. If you want to see the standard way, check out Larry Robinson’s book, The Art of Inlay. It has wonderful pictures. His method for cutting pearl, which is more orthodox, involves a simple cutting table that has a V-shaped cutout with a small hole at the narrow end, and you saw vertically as you hold the piece down on this table. I just never could get the hang of that; it seemed very cumbersome and slow. The one advantage I can see in that approach is that the material is always supported right next to your blade, so you can make little tight cuts with less risk of breakage.