Web Extras American Lutherie #115 - Fall 2013 Page 24 - Meet the Maker: Martin de Witte by Federico Sheppard Page 30 - 1930 Santos Hernández by Jeffrey R. Elliott Note earlier support strip over back crack. Note earlier support strip over back crack. Note 1MM thick support cleats over back crack. Note earlier support cleats over old back crack, and the newer ones, where the crack extended. Note the short, slight taper on the back braces, the side support, and short tentellones on the ends of the back braces. There’s a cleat over a back crack near the end of the far brace. Note the two separate, additional narrow bands of head veneer just above the nut slot. Santos’ beautiful trademark rosette, with its wave pattern central mosaic. 1930 Santos Hernandez after repair. Top is European spruce; back, sides, bridge, and head veneer is Brazilian Rosewood; neck is Spanish cedar; fingerboard is ebony. (image 1 of 2) 1930 Santos Hernandez after repair. Top is European spruce; back, sides, bridge, and head veneer is Brazilian Rosewood; neck is Spanish cedar; fingerboard is ebony. (image 2 of 2) Additionlal detail shot Additionlal detail shot Additionlal detail shot Additionlal detail shot Additionlal detail shot Additionlal detail shot Additionlal detail shot Additionlal detail shot Additionlal detail shot Additionlal detail shot Additionlal detail shot Page 38 - Meet the Maker: Roger Alan Skipper by John Calkin Hiking in Bolivian Andes with wife and granddaughter. Jammin’ at Deer Camp. Taking a break from hunting ginseng to admire a poplar tree. Page 71 - In Memoriam: Gene Stephenson by John Calkin Here’s a photo of Gene at the 2001 GAL Convention, rockin’ a cool flat-top.