Posted on June 27, 2019March 7, 2024 by Dale Phillips Top 40 Wood List Top 40 Wood List by Nicholas Von Robison previously published in Lutherie Woods and Steel String Guitars, 1994 See also, “Taxonomy and Nomenclature” by Nicholas Von Robison “Glossary of Basic Wood Terms” by Nicholas Von Robison The contemporary luthier can be said to be either in a bind or in a unique evolutionary position, depending on one’s point of view. In the following list of lutherie woods, many will be noted as banned, extinct, prohibited, embargoed, unavailable, and/or expensive. In many cases I have listed viable alternative woods to replace the traditional species based on my own knowledge, education, experience, and on the advice, suggestions, and experience of respected, reputable wood specialists, dealers, and luthiers. While many species can be freely exchanged or adopted in place of the traditional woods of beauty and adornment, those that fall into the category of replacements for traditional resonant woods must be tried without any assurance or guarantee that musicians will accept these alternative woods. The acceptability of a wood species for the production of stringed musical instruments is largely dictated by the traditional practices and materials handed down through centuries. Many of the favored wood species are those that were available in commerce not only to the luthier but to the European furniture craftsmen as well. It can be very difficult for the luthier to obtain acceptance of new materials by the end user, the musician. The musician expects to hear a certain sound from an instrument, and any variation from that sound, as well as any variation in physical appearance, is suspect. In view of this, the chances of obtaining musical acceptance for instruments built with nontraditional woods has been slim in the past. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on June 26, 2019March 7, 2024 by Dale Phillips Nine Electric Guitar Construction References Reviewed Nine Electric Guitar Construction References Reviewed by John Calkin previously published in American Lutherie #63, 2000 Electric guitars are interesting creatures. The noises they are capable of producing are so far removed from an acoustic guitar that a listener could convince him/herself that either something magical has happened to the instrument or something has gone dreadfully wrong in the world. Creating electric guitars often conjures up a frustrating paradox. The guitar body begins life as nothing more than a chunk of wood and ends up as little more than a chunk of wood, but assembling and shaping that chunk can present a challenge out of all proportion to what you end up with. Power planers and jointers are expensive. On the other hand, accomplishing the job with hand tools requires a serious investment in time needed to learn to sharpen, set up, and master the tools. Farming out the heavy work is possible, but often seems to dilute the lutherie experience (a belief, strangely enough, found most often in rank beginners who have neither money nor talent, and are often cursed with a stunted sense of the practical). To me the obvious answer was plywood, which makes a much better guitar than anyone would have you believe. The shape, cavities, and channels can all be established with routers and such before the body is glued up to thickness. It’s chief drawback is that it’s hard to finish nicely, but it will get you into guitar making with the least amount of outside help and expense. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on June 26, 2019March 7, 2024 by Dale Phillips The Colombian Andean Bandola The Colombian Andean Bandola by Luis Alberto Paredes Rodríguez and Manuel Bernal Martínez previously published in American Lutherie #96, 2008 The Colombian Andean bandola is a transcultural product similar to plectrum-played antecedents from Asia and Europe. It is a 12-string, 6-course soprano instrument with “flat” top and back, and is the solo melodic instrument in the Colombian Andean quartet, which consists of two bandolas, a tiple (see Big Red Book Volume Seven, previously published in AL#82), and a classical guitar. The name “bandola” comes from the old Persian-Arabic word pandura. Derived from the name of the European lute, the word refers to a great variety of instruments of medium and high register with melodic functions. The direct ancestor of the bandola is the guitar through the Spanish bandurria and the soprano guitars, and which after taking its form in Colombia during the 19th and 20th centuries, continues to undergo transformations in its morphology and usage. The Colombian Andean bandola has two developmental lineages: on one hand, the denomination line which makes reference to its name, and on the other, the construction line which makes reference to its morphological features (Bernal, 2003). The name of the bandola comes from the pandura (known since the 10th century) following the European lute, and one of its families known as the “mandoras family.” These 4- to 6-course instruments with thin bodies had a variety of pitches (a mixture of perfect fourths and fifths) and scale lengths ranging between 37CM and 42CM. By the year 1700, the mandolines emerged in Italy when the size of the mandola was reduced, prevailing and persisting in Italy in two different models: the Milanese mandoline with a thin, slightly arched body, and six courses of either gut or metal strings tuned in perfect fourths; and the Neapolitan mandolin with a bowl back body, a cranked (bent) soundboard just where the bridge is placed, four courses of metal strings tuned like a violin, and strings fastened to the end of the body by way of a tailpiece. The scale for both models is about 32CM to 34CM. In the 18th century, mandolins began to be manufactured with flat or slightly arched sides and back, especially in France, Germany, and Portugal. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on June 26, 2019March 7, 2024 by Dale Phillips The Catgut Acoustical Society and the New Violin Family Association The Catgut Acoustical Society and the New Violin Family Association by Robert J. Spear previously published in American Lutherie #86, 2006 See also, Meet the Maker: Carleen Hutchins by Alan Carruth The New Violin Family by Alan Carruth The Catgut Acoustical Society (CAS) had been known for nearly fifty years for the creation of the violin octet, mainly through the research and development of Carleen Hutchins (with the assistance of over a hundred society members), but the society also undertook a number of acoustically related projects during this same period. As the 20th century ended, some members wanted to focus more on these areas. There was also a growing feeling among the octet developers that this magnificent set of instruments needed to leave the world of science and enter the world’s concert stages. At the end of 1999, the society split into two groups, with one retaining the original CAS name and research focus. The other, the New Violin Family Association (NVFA), was formed to take on the challenge of promoting the Violin Octet. The division produced advantages and disadvantages for all concerned. The CAS and NVFA were now free to focus more directly on their respective areas of interest. But both were considerably smaller and financially weaker after the membership divided, and each soon had to redefine itself. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
Posted on June 24, 2019March 7, 2024 by Dale Phillips Grading and Resawing Lutherie Wood Resawing Lutherie Wood by Bruce Creps previously published in American Lutherie #91, 2007 See also, “Sharpening the Stellite Teeth on the 3" Hitachi Blade” by Bruce Creps “Grading and Curing Lumber” by Bruce Creps Harvesting, milling, and processing tonewood can be a wasteful business. Much of the wood used by luthiers comes from large, older trees, elders worthy of respect. As someone fortunate enough to work with these rare, high-grade woods, one of my top goals is to minimize waste by processing this valuable resource efficiently. This article concerns the Hitachi CB75F resaw, though much of what follows is general enough to be applicable to other resaws. Luthiers who buy resawn sets might glean information about how their wood is processed and what to request or avoid when ordering. A note on nomenclature: A resaw is an upright or horizontal bandsaw set up to make uniform rip cuts. The front of the saw is where you start feeding a cut. The face of a board is its wide, longitudinal surface; the edge is its narrow longitudinal surface; the end is its crosscut surface. The resaw blade is made up of its band and its teeth (terms not necessarily interchangeable). I refer to vertical-grain wood in place of quartersawn wood to avoid confusion, since a sawyer can get vertical-grain cuts without quartering a log. Become A Member to Continue Reading This Article This article is part of our premium web content offered to Guild members. To view this and other web articles, join the Guild of American Luthiers. Members also receive 4 annual issues of American Lutherie and get discounts on products. For details, visit the membership page. If you are already a member, login for access or contact us to setup your account.
